ELD Performance 10.5" .223 Wylde, Carbine Gas, 1:7T, Pencil Profile, 4140, Nitride

General Barrel Info: The barrel on an AR-15 originally operates under a 'gas impingement' system, by tapping gas off of the barrel and cycling it back through the gas system to assist the bolt carrier in unlocking and extracting the spent cartridge. AR-15 Barrels come in four different specifications for gas systems, Pistol, Carbine, Mid-Length, and Rifle. AR-15 Barrels vary between profiles as well from Government, to Heavy, and Slim. Thanks to the modularity of AR-15, you can choose different calibers starting with the barrel, each with its specific twist rates. Choosing your barrel for your next AR-15 build has never been easier.

About This Barrel: This barrel is chambered in .223 Wylde with a 1:7 twist rate. It is 10.5-inches long and made from 4140 steel with a black nitride finish to improve longevity and reliability. It operates on a carbine system and has a pencil profile to keep it sleek and lightweight.

Barrel Classification: Pistol

Length: This Barrel is designated as a pistol barrel with an overall 10.5" length.

Caliber: .223Wylde - This barrel is chambered to fire both .223 Remington and 5.56 NATO, the most commonly used round designed for the AR-15 platform. .223 Wylde is a commercial specification of 5.56 NATO and will still allow you to chamber and fire 5.56 NATO cartridges.

Material: 4150 CrMoV - Chrome-Moly Vanadium, or simply "CMV", is the official mil-spec gun steel developed by Colt Firearms for the military-issued M16 and M4. It contains the same elements as 4150 steel. It also contains Vanadium. Vanadium significantly increases the strength, hardness, and high-temperature stability of the steel.

Finish: Nitride - Nitriding is a process during manufacturing that diffuses nitrogen into the steel to make a case-hardened surface for improved resistance and strength. A Nitrided barrel typically have a gloss black texture.

Thread Pitch: 1/2x28 - This threading is commonly found on barrels chambered in 5.56, .223, and .224. This will allow the installation of most muzzle devices such as flash hiders, blast cans, and compensators threaded to 1/2x28 threads.