0 item(s) in cart/Total: $0

Delta Deals AR-15 Lower Enhancement Kit + Davidson Defense Trigger

Delta Deals AR-15 Lower Enhancement Kit + Davidson Defense Trigger

On sale $147.99
Retail Price:$308.99
Your Savings:$161.00(52%)
In Stock
Part Number:CO-20263
Delta Deals AR-15 Lower Enhancement Kit 
+ Davidson Defense Trigger

Davidson Defense 3.5lbs "Phantom" Drop in Trigger 
Manufactured by Rise Armament

Davidson Defense 3.5lbs Drop in Trigger Manufactured by Rise Armament AR-15 M4 3.5-lb Drop-In Match Trigger System 

Match Grade trigger pull at 3.5 lbs consistent made by Rise Armament.

Key Features:
Single-stage trigger system
3.5-lb. pull weight
Clean break with a short reset
Black 8625 hardcoat anodized aluminum cassette
Comfortable rounded, trigger
Manufactured and assembled in Rise Armaments facility according to strict AS9100 aerospace requirements, which are more stringent than standard gun manufacturing requirements
CNC machined from high-grade, heat-treated tool steel and aluminum
Fits most .308 and .223 AR style platforms
Self-contained design makes it easy and quick to install with no fine-tuning needed
Anti-Rotate/anti-walk pins strongly recommended but not required standard pins will work most of the time, but no pins are included.
Note: The set screw should not be tampered with. under the hammer
.154" trigger pins holes, no .170" Colt available

Instructions for installing Drop-In AR-15 and AR-10 trigger group.

1. If installing in a receiver that already has a trigger and hammer installed, remove the trigger pin and hammer pin and remove the trigger and hammer as well as the grip, safety selector and detent. New receivers, install the drop-in trigger before mounting the grip.
2. Insert the trigger pack into the fire control compartment
3. Insert the hammer and trigger pins. Anti-walk type pins work much better, as standard pins can drop out.
4. Towards the center of the trigger cassette you will see two small set screws. With the trigger and hammer pins in place, push the trigger spring towards the center with your Allen wrench and turn those set screws down to raise the trigger the point that there is pressure created on the trigger and hammer pins which will hold them in place. This step is VERY important and will take care of the slight dimensional differences between lower receivers. 
5. Install the retainers on the anti-walk pins
6. Insert the safety selector switch. The hammer needs to be in the cocked position. Take care as it is inserted to not push the selector into the back extension of the trigger. Replace the safety detent, spring and grip.
7. At this point you can test the trigger pull and reset.  

Premium Davidson Defense Anti-Walk Pins

Davidson Defense anti-walk pins are great for drop-in triggers; they replace the original hammer and trigger pins and are retained by special retaining for a positive lock. One side is flared and broached, and the other side is threaded for a screw. Fits small pin lowers (.154"). 
Made of blackened chrome vanadium tool steel
Allen wrench is 1/16th
These are some of the best anti-walk pins on the market.
Retained in the gun, so dirt will not cause a stoppage 
The metal is hard, so there will never be any bending or warping.
Great for drop-in triggers and Mil-Spec triggers.
Works with both forged and billet uppers 
The competition’s pins will not work with billet uppers, but ours do. 
Patent pending design 
This is not anti-rotate; it is anti-walk. That means the pins will not fall out.

Parts Included: 
·        One blackened finish stainless steel screw
·        Pins are .154" diameter, and 1.05" long

These pins replace the original hammer and trigger pins. 

AR-15 Steel Extended Mag Release –
Black color (Easy to install)

Extended Magazine Release allows for rapid magazine changes without disrupting your shooting position. The texture ensures a superior grip. May not be compatible with all KNS Precision Anti-Rotation Pins. This US Tactical product is protected by a full Lifetime Warranty!

Made In The USA

Trinity Force Shark Tooth Ambidextrous
Semi Auto Selector Switch

Dual-sided, ambidextrous levers allow easy use from either side of the receiver

The Trinity Force AR Ambidextrous safety selector can be installed on any standard AR lower receiver and will function when deployed on either the right or left side of the rifle. The right hand lever has been shortened to accommodate right-handed shooters.

Material: High Carbon S7 Tool Steel
Right or Left Levers
High Quality Parts 

Trinity Force Stainless AR-15 Takedown Pin Set (Quick Pull) 

The stainless AR-15 Takedown Pin Set  is compatible with any mil-spec lower receiver and includes both the front pivot pin and the rear takedown pin. The pin set features extended and knurled heads for quick manipulation and are cross-drilled to accommodate pull rings for increased leverage when disassembling the gun.

Davidson Defense Ambidextrous Bolt Release AR-15 Aluminum Matte 

Higher quality than other bolt releases

The Davidson Defense Ambidextrous bolt release is an extended lever for the standard AR-15 bolt catch. The lever allows the user to engage and release the bolt catch with the right hand on the pistol grip, or release the bolt catch with the left hand on the pistol grip. The release also simplifies malfunction clearance and reloads. Streamlined construction does not interfere with normal operation. made of 7075 T6 Aluminum 

USE LOCK-TITE or any blue Light duty thread lock on screws that attach on rifle (or clear fingernail polish) where screws may loosen if not used 

This is true on all Accessories put on a rifle but especially on this type of part (can be found at wallmart or any auto parts place in single use size for $1 usually)

**Note: Compatible with all standard, Mil-Spec, forged AR-15 lower receivers. Is not compatible with LR-308, SR-25, AR-10 or other .308 AR-style platforms.

Please note: If the listing says "In-Stock" it means we have all of the items in stock. Please check this LINK to view our most up to date shipping status.
Warranty, Returns & Terms: Delta Team Tactical offers a 30 day return, refund and exchange policy. You must email or call Delta Team Tactical and obtain an RMA number prior to any return, refund, or exchange. All returns must include the original order number, receipt or invoice, along with the billing address, shipping address, contact phone numbers, contact emails, and RMA number. Returns, refunds, and exchanges may take up to two weeks, not including transit times, for processing after we receive it. Return shipping costs will be the responsibility of the returning party, with the exception of the wrong item being received or on warranty exchange during the first 30 days after delivery. Items returned for warranty will only be replaced or exchanged, not refunded.

Related Items

Recently Viewed Items