1. Delta Deals AR-15 Trigger Upgrade Kit Including Davidson Defense Phantom "Drop-In" Trigger + "Lite" AR-15 LPK - No FCG + Anti Walk Pins

Delta Deals AR-15 Trigger Upgrade Kit Including Davidson Defense Phantom "Drop-In" Trigger + "Lite" AR-15 LPK - No FCG + Anti Walk Pins

Part Number: CO-82251-HS
0 Review(s) Write a Review
On sale $249.99 $109.99
Retail Price:$249.99
Your Savings:$140.00(56%)
In Stock
Delta Deals AR-15 Trigger Upgrade Kit Including Davidson Defense Phantom "Drop-In" Trigger 
+ "Lite" AR-15 LPK - No FCG 
+ Anti Walk Pins

Here at Delta Team Tactical our primary objective to provide simple, effective, and affordable means to build a custom AR. One of the most effective ways to improve accuracy while shooting experience is by upgrading your trigger assembly. An upgraded trigger mechanism allows the shooter to shoot more accurately with a lower pull weight, provides a comfortable pull as compared to stock triggers, and is more ergonomic. One frustration people have when upgrading any part is knowing which parts are compatible with each other.  That's why we created the Delta Deals Trigger Upgrade Kits, the easiest way to have an enhanced shooting experience at the most affordable price.

Davidson Defense Phantom "Drop-In" Trigger

Davidson Defense 3.5lbs Drop in Trigger Manufactured by Rise Armament AR-15 M4 3.5-lb Drop-In Match Trigger System.  Match Grade trigger pull at a consistent 3.5 lbs.

FEATURES:
Single-stage trigger system
3.5-lb. pull weight
Clean break with a short reset
Black 8625 hardcoat anodized aluminum cassette
Comfortable, rounded trigger
Manufactured and assembled in Rise Armament's facility according to strict AS9100 aerospace requirements, which are more  stringent than standard gun manufacturing requirements
CNC machined from high-grade, heat-treated tool steel and aluminum
Fits most .308 and .223 AR style platforms
Self-contained design makes it easy and quick to install with no fine-tuning needed
Anti-Rotate/anti-walk pins strongly recommended but not required standard pins will work most of the time, but no pins are included.

Note: The set screw should not be tampered with under the hammer, .154" trigger pins holes, no .170" Colt available

Instructions for installing Drop-In AR-15 and AR-10 trigger group.

1. If installing in a receiver that already has a trigger and hammer installed, remove the trigger pin and hammer pin and remove the trigger and hammer as well as the grip, safety selector and detent. New receivers, install the drop-in trigger before mounting the grip.

2. Insert the trigger pack into the fire control compartment

3. Insert the hammer and trigger pins. Anti-walk type pins work much better, as standard pins can drop out.

4. Towards the center of the trigger cassette you will see two small set screws. With the trigger and hammer pins in place, push the trigger spring towards the center with your Allen wrench and turn those set screws down to raise the trigger the point that there is pressure created on the trigger and hammer pins which will hold them in place. This step is VERY important and will take care of the slight dimensional differences between lower receivers. 

5. Install the retainers on the anti-walk pins

6. Insert the safety selector switch. The hammer needs to be in the cocked position. Take care as it is inserted to not push the selector into the back extension of the trigger. Replace the safety detent, spring and grip.

7. At this point you can test the trigger pull and reset.  

"Lite" AR-15 LPK - No FCG

KAK AR-15 "LITE" Lower Parts Kit, Features KAK produced parts throughout. No Fire Control Group. KAK Trigger Guard included! Standard A2 Handle, KAK Black Oxide Coated Steel Springs.

Use this Lower Parts Kit when using your aftermarket Match Trigger.

Same as KAK's Standard LPK but missing the following items:
Hammer
Hammer Spring
Trigger
Trigger Spring
Disconnector
Disconnector Spring
Hammer Pin
Trigger Pin

Parts Missing From Standard LPK:
Hammer
Trigger
Disconnector
Pistol Grip

SS Anti Walk Pins

Keeps trigger/hammer pins from "walking" out of the receiver
Helps prevent wear and enlargement of the receiver trigger/hammer pin holes
Stainless Steel construction

Please note: If the listing says "In-Stock" it means we have all of the items in stock. Please check this LINK to view our most up to date shipping status. 
Warranty, Returns & Terms:
Delta Team Tactical offers a 30 day return, refund and exchange policy. You must email or call Delta Team Tactical and obtain an RMA number prior to any return, refund, or exchange. All returns must include the original order number, receipt or invoice, along with the billing address, shipping address, contact phone numbers, contact emails, and RMA number. Returns, refunds, and exchanges may take up to two weeks, not including transit times, for processing after we receive it. Return shipping costs will be the responsibility of the returning party, with the exception of the wrong item being received or on warranty exchange during the first 30 days after delivery. Items returned for warranty will only be replaced or exchanged, not refunded.

Recently Viewed Items

//DRIP Product View JS //End Product View JS TOP
0 Items