Davidson Defense Left-Handed Ronin Competition w/SBA3 Brace 7.5-inch Pistol-Gas 1:7 5.56 NATO AR-15 Freefloat M-Lok Handguard Pistol Full Build Kit

Left-Handed Ronin Competition w-SBA3 Brace 7.5-Inch Pistol-Gas 1-7 5.56 NATO AR-15 Freefloat M-LOK Handguard Pistol Full Build Kit

This is a left-handed AR-15 pistol full build kit chambered in 5.56 NATO, centered on a Bear Creek Arsenal Irithyll 7.5-inch contour steel barrel with a manganese phosphate finish, a 1-7 twist rate, and a pistol-length gas system. The Black Diamond Series left-handed slick side billet aluminum upper receiver anchors the front end with a left-hand ejection port and a clean slick side exterior that omits the forward assist and dust cover from the receiver body. The pistol-length gas tube and micro low-profile gas block at .750 complete the gas system, and the ACE-20 Series 7-inch freefloat M-LOK handguard covers the compact forend. An A2 GI Birdcage flash hider at 1-2x28 closes out the muzzle end. A Davidson Defense premium left-handed M16 nitride bolt carrier group and a Mil-Spec M4 charging handle complete the upper side. The lower completion package covers a complete Mil-Spec AR-15 lower parts kit, a Mil-Spec heavy-duty 6-position buffer tube, a standard AR-15 carbine buffer at 3 oz., a standard AR-15 carbine recoil spring made in the USA, a Mil-Spec AR-15 and M16 receiver end plate, and an AR-15 carbine castle nut. An SB Tactical SBA3 adjustable pistol stabilizing brace in black closes out the rear end. Lower receiver not included.

Key Features

• 5.56 NATO chambering, Bear Creek Arsenal Irithyll 7.5-inch contour steel barrel, manganese phosphate finish
• 1-7 twist rate, 1-2x28 thread pitch
• Pistol-length gas system with pistol-length gas tube
• Micro low-profile gas block, .750
• Black Diamond Series left-handed slick side billet aluminum upper receiver, no forward assist, no dust cover
• ACE-20 Series 7-inch freefloat M-LOK handguard
• Davidson Defense premium left-handed M16 nitride bolt carrier group
• Mil-Spec AR-15 M4 charging handle
• A2 GI Birdcage flash hider, 1-2x28 thread pitch
• Black 1-2-inch crush washer
• Complete Mil-Spec AR-15 lower parts kit
• Mil-Spec heavy-duty 6-position buffer tube
• Standard AR-15 carbine buffer, 3 oz.
• Standard AR-15 carbine recoil spring, made in the USA
• Mil-Spec AR-15 and M16 receiver end plate
• AR-15 carbine castle nut
• SB Tactical SBA3 adjustable pistol stabilizing brace, black

Perfect For

• Left-handed AR-15 pistol builders who need everything above the lower receiver for a 5.56 NATO build
• Shooters pairing this kit with an existing stripped or complete AR-15 lower receiver configured for left-hand operation
• Left-handed builders who want an SBA3 brace and a complete 5.56 pistol component set with a Bear Creek Arsenal Irithyll barrel and purpose-built left-hand ejection slick side billet upper covered in one kit

Upper Assembly

The Black Diamond Series left-handed slick side billet aluminum upper receiver anchors the front end with a left-hand ejection port and a clean slick side exterior profile that omits both the forward assist and dust cover from the receiver body. The Bear Creek Arsenal Irithyll 7.5-inch contour steel barrel brings a manganese phosphate finish and a 1-7 twist rate to the 5.56 NATO chamber, threaded at 1-2x28. The pistol-length gas tube and micro low-profile gas block at .750 run a pistol-length gas system along the 7.5-inch barrel. The ACE-20 Series 7-inch freefloat M-LOK handguard surrounds the barrel and gas system along the compact forend with M-LOK slots along the handguard body for accessory attachment across the full 7-inch length.

Bolt Carrier Group and Charging Handle

The Davidson Defense premium left-handed M16 nitride bolt carrier group is a purpose-built left-hand BCG designed to function with the left-handed upper receiver and eject cases from the left side of the build. The Mil-Spec M4 charging handle pairs with the BCG inside the upper receiver to complete the upper interior and finish the front end of the build.

Muzzle Device

The A2 GI Birdcage flash hider threads onto the 1-2x28 muzzle end of the barrel. The included black 1-2-inch crush washer seats at the barrel shoulder and completes the muzzle hardware for this kit.

Lower Completion Components

The complete Mil-Spec AR-15 lower parts kit covers the full internal lower component group, including the fire control group, magazine catch, bolt catch, and all associated pins and springs. The Mil-Spec heavy-duty 6-position buffer tube, standard AR-15 carbine buffer at 3 oz., and standard AR-15 carbine recoil spring made in the USA form the buffer system at the rear of the lower. The Mil-Spec AR-15 and M16 receiver end plate and AR-15 carbine castle nut lock the buffer tube down cleanly at the rear of the lower receiver. The SB Tactical SBA3 adjustable pistol stabilizing brace in black fits over the Mil-Spec 6-position buffer tube and closes out the rear end of the build with an adjustable length of pull and a well-regarded brace design trusted across the AR pistol platform.

Follow safe handling and manufacturer instructions. Ensure compliance with all applicable federal, state, and local laws. Lower receiver not included.