1. Home
  2. Firearms
  3. Alias AR 15 Lower, Rare Breed FRT 15L3, Shockwave Blade

Alias AR 15 Lower, Rare Breed FRT 15L3, Shockwave Blade

Part Number: S-PI-P-LR15-66856
Write a Review
No logo AR15 lower build kit with Rare Breed FRT-15L3 Flat, LPK, pistol tube, H3 SMB and Shockwave Blade brace. BCG and upper not included.
On sale $863.99 $649.99
Retail Price:$863.99
Your Savings:$214.00(25%)
0 left In Stock!
Availability: Waitlist
FREE SHIPPING

Choose Options

*
*

Details

No Logo AR15 Pistol Lower Kit With Rare Breed FRT 15L3 Flat Trigger, H3 Buffer and Shockwave Blade Pistol Stabilizer

The Alias No Logo lower build kit is built around a M4 AR 15 lower receiver with no logo, paired with a Rare Breed FRT-15L3 Flat single-stage, 3-position forced reset trigger. It includes a mil-spec lower parts kit with an A2 grip and an Armaspec H3 Sound Mitigation Buffer on a pistol buffer tube. The rear of the kit is finished with the Shockwave Blade pistol stabilizer. The FRT-15L3 requires a full-auto profile bolt carrier group, which is not included. Upper receiver is not included.

Key Features

  • M4 AR 15 lower, forged 7075-T6, Type III hardcoat black, no logo
  • Rare Breed FRT-15L3 Flat single-stage, 3-position forced reset trigger (Safe / Semi / FRT)
  • Ambidextrous selector and anti-walk pins included with the trigger
  • Mil-spec lower parts kit with A2 pistol grip
  • Heavy-duty AR pistol buffer tube, smooth profile, aluminum
  • Armaspec H3 Sound Mitigation Buffer Gen 3, 5.6 oz equivalent, captured spring
  • Mil-spec end plate and carbine castle nut
  • Shockwave Blade pistol stabilizer, glass-reinforced polymer, set screw mount
  • BCG and upper receiver not included

Lower Receiver

The lower receiver is the M4 AR 15 lower, forged from 7075-T6 aluminum with a black Type III hardcoat anodized finish. It follows the standard AR 15 mil-spec pattern and has a low shelf trigger pocket with an M16 cut. The exterior carries minimal markings with no logo, with safe and fire markings on both sides. It is made in the USA and accepts standard AR 15 upper receivers and lower components.

Rare Breed FRT-15L3 Flat Trigger

The fire control group is the Rare Breed Triggers FRT-15L3 Flat, a drop-in, 3-position forced reset trigger with a flat trigger shoe, made in the USA. Its ambidextrous selector has Safe, Semi and FRT positions. It is a single-stage trigger in both modes, with about 4 to 4.5 lbs of pull in Semi and about 5.5 to 6 lbs in FRT mode. The housing is 7075 anodized aluminum with heat-treated 4140 steel, and the trigger comes with its selector drum, long and short selector levers, anti-walk pins with screws and two T10 Torx wrenches. It fits mil-spec AR 15 lowers and requires a full-auto profile bolt carrier group.

Lower Parts Kit

A mil-spec AR 15 lower parts kit covers the rest of the lower. It includes the magazine catch and release, bolt catch, pivot and takedown pins, trigger guard and buffer retainer. The detents, springs and roll pins for those parts are in the kit. A black mil-spec A2 pistol grip is included as well.

H3 Buffer System

The rear of the kit uses a heavy-duty AR pistol buffer tube in black Type II anodized aircraft-grade aluminum, with a smooth pistol profile, a 1.24 in outer diameter and a 7.375 in length. Inside it sits an Armaspec Sound Mitigation Buffer Gen 3 in the H3 weight, a single-stage captured buffer and spring assembly. It is about 5.6 oz equivalent (6.71 oz as a complete system) and is built to keep the spring from rubbing the inner wall of the tube. A mil-spec steel receiver end plate and a black carbine castle nut complete the rear hardware.

Pistol Brace

The brace is the Shockwave Blade pistol stabilizer in black high-strength glass-reinforced polymer, made in the USA. It slips onto pistol buffer tubes up to 1.25 in diameter, including the pistol tube in this kit. A large set screw locks it in place. The fixed blade design weighs about 5 oz.

Follow all manufacturer instructions and safe handling practices.
Ensure compliance with all applicable federal, state, and local laws.
This item must be transferred in accordance with all applicable federal, state, and local laws.

Specifications

Product Type: AR 15 Pistol Lower Build Kit

Model: Alias No Logo

Platform: AR 15

Lower Receiver: M4, Forged 7075-T6 Aluminum

Lower Finish: Type III Hardcoat Anodized, Black

Trigger Pocket: Low Shelf, M16 Cut

Markings: No Logo

Trigger: Rare Breed Triggers FRT-15L3 Flat, Single-Stage, 3-Position Forced Reset

Trigger Shoe: Flat

Selector Positions: Safe / Semi / FRT, Ambidextrous

Semi Pull Weight: About 4 to 4.5 lbs (Single-Stage)

FRT Mode Pull Weight: About 5.5 to 6 lbs (Single-Stage)

Trigger Materials: 7075 Aluminum Housing, Heat-Treated 4140 Steel

Trigger Includes: Selector Drum, 2 Levers, Anti-Walk Pins, T10 Screws and Wrenches

BCG Requirement: Full-Auto Profile BCG (Not Included)

Lower Parts Kit: Mil-Spec, A2 Grip

Buffer Tube: Heavy-Duty Pistol Buffer Tube, Aluminum, Type II Anodized

Buffer Tube Diameter: 1.24 in OD, 7.375 in Long

Buffer: Armaspec Sound Mitigation Buffer Gen 3, H3

Buffer Weight: 5.6 oz Equivalent, 6.71 oz Complete

Recoil Spring: Captured in Buffer Assembly

End Plate: Mil-Spec, Steel, Black

Castle Nut: Carbine, Black

Brace: Shockwave Blade Pistol Stabilizer

Brace Material: Glass-Reinforced Polymer

Brace Color: Black

Brace Adjustment: Fixed

Brace Mount: Set Screw, Pistol Tube up to 1.25 in

Brace Weight: About 5 oz

BCG: Not Included

Upper Receiver: Not Included

Check out our Shipping and Processing Times
Check out our Warranty/Returns and Terms and Conditions
Check out our State Restrictions page

Related Items

TOP
0 Items
Logo