NO-LOGO AR-15 Rifle Lower Build Kit, BCM Mod 2 SOPMOD Stock

NO-LOGO AR-15 Rifle Lower Build Kit, BCM Gunfighter SOPMOD Widebody Mod 2 Stock

This is a Delta-M4 No Logo AR-15 rifle lower build kit built around a forged 7075-T6 aluminum lower receiver with a Type III hardcoat anodized black finish, a Mil-Spec AR-15 pattern, a low shelf trigger pocket with M16 cut, and Safe, Semi, and Full Auto selector markings. The receiver is made in the USA and carries minimal exterior markings with no logo present beneath the trigger pocket. Manufacturer, origin, and serial number markings are located on the side of the receiver. The complete Mil-Spec AR-15 lower parts kit includes a Mil-Spec curved trigger and Mil-Spec A2 grip in black. The buffer system runs on a Mil-Spec heavy-duty 6-position carbine buffer tube, paired with a standard AR-15 carbine buffer at 3 oz., a standard AR-15 carbine recoil spring made in the USA, a US Tactical AR-15 and M16 Mil-Spec receiver end plate, and a Mil-Spec AR-15 carbine castle nut. A BCM Gunfighter SOPMOD Widebody Mod 2 stock in black military-grade polymer made in the USA closes out the rear end, bringing a semi-clubfoot design, a patented internal latch system, a removable modular buttpad system, an ambidextrous rotation-limited QD sling mount, a VBOST sling tab, dual web sling attachment slots, an internal storage compartment, and snag-free smooth edges.

Key Features

• Delta-M4 No Logo forged 7075-T6 aluminum lower receiver, Type III hardcoat anodized black, Mil-Spec AR-15 pattern, USA made
• Low shelf trigger pocket with M16 cut
• Minimal exterior markings, no logo beneath trigger pocket
• Manufacturer, origin, and serial number markings on side of receiver
• Safe, Semi, and Full Auto selector markings
• Standard AR-15 and STANAG magazine compatible
• Complete Mil-Spec AR-15 lower parts kit with Mil-Spec curved trigger and Mil-Spec A2 grip, black
• Mil-Spec heavy-duty 6-position carbine buffer tube
• Standard AR-15 carbine buffer, 3 oz.
• Standard AR-15 carbine recoil spring, made in the USA
• US Tactical AR-15 and M16 Mil-Spec receiver end plate
• Mil-Spec AR-15 carbine castle nut
• BCM Gunfighter SOPMOD Widebody Mod 2 stock, black, military-grade polymer, USA made, semi-clubfoot design, patented internal latch system, removable modular buttpad with rubberized and diamond-textured non-slip pad options, ambidextrous rotation-limited QD sling mount, VBOST sling tab, dual web sling attachment slots, internal storage compartment, snag-free smooth edges, Mil-Spec carbine receiver extension compatible

Perfect For

• AR-15 rifle builders sourcing a complete lower build kit on a USA-made no logo minimal marking lower receiver with a BCM Gunfighter SOPMOD Widebody Mod 2 stock included
• Shooters pairing this kit with an existing upper assembly who want a clean no logo lower receiver and a BCM Mod 2 stock with a full suite of sling attachment options, modular buttpad system, and internal storage covered in one package
• Builders who want a forged USA-made lower receiver with a consistent all-black exterior and a feature-rich USA-made BCM SOPMOD Widebody Mod 2 stock in one complete lower kit

Lower Receiver and Trigger

The Delta-M4 No Logo forged 7075-T6 aluminum lower receiver carries a Type III hardcoat anodized black finish with a Mil-Spec AR-15 pattern, a low shelf trigger pocket with M16 cut, and Safe, Semi, and Full Auto selector markings. The receiver is made in the USA with minimal exterior markings and no logo beneath the trigger pocket, a clean exterior profile for builders who prefer a low-profile or unmarked lower receiver aesthetic. Manufacturer, origin, and serial number markings are present on the side of the receiver as required. The complete Mil-Spec AR-15 lower parts kit covers the full internal lower component group with a Mil-Spec curved trigger at its center and a Mil-Spec A2 grip in black covering the grip interface.

Buffer System and Stock

The Mil-Spec heavy-duty 6-position carbine buffer tube, standard AR-15 carbine buffer at 3 oz., and standard AR-15 carbine recoil spring made in the USA form the complete buffer system at the rear of the lower. The US Tactical AR-15 and M16 Mil-Spec receiver end plate and Mil-Spec AR-15 carbine castle nut lock the buffer tube down cleanly at the rear of the lower receiver. The BCM Gunfighter SOPMOD Widebody Mod 2 stock in black military-grade polymer made in the USA fits directly onto the Mil-Spec carbine buffer tube and closes out the rear end with a semi-clubfoot design that is recontoured for improved prone shooting and sling clearance relative to a standard SOPMOD profile. The patented internal latch system secures the stock on the buffer tube, and the removable modular buttpad system gives the shooter a choice between a rubberized pad and a diamond-textured non-slip pad depending on preference. The ambidextrous rotation-limited QD sling mount, VBOST sling tab, and dual web sling attachment slots together give the builder multiple sling attachment options across multiple sling configurations built directly into the stock body. An internal storage compartment rounds out the feature set, and snag-free smooth edges along the stock exterior keep the profile clean and unobtrusive.

Follow safe handling and manufacturer instructions. Ensure compliance with all applicable federal, state, and local laws.