NO-LOGO AR-15 Rifle Lower Build Kit, Magpul FDE DT Carbine Stock

NO-LOGO AR-15 Rifle Lower Build Kit, Magpul FDE DT Carbine Stock

This is a Delta-M4 No Logo AR-15 rifle lower build kit built around a forged 7075-T6 aluminum lower receiver with a Type III hardcoat anodized black finish, a Mil-Spec AR-15 pattern, a low shelf trigger pocket with M16 cut, and Safe, Semi, and Full Auto selector markings. The receiver is made in the USA and carries minimal exterior markings with no logo present beneath the trigger pocket. Manufacturer, origin, and serial number markings are located on the side of the receiver. The complete Mil-Spec AR-15 lower parts kit includes a Mil-Spec curved trigger and Mil-Spec A2 grip in black. The buffer system runs on a Mil-Spec heavy-duty 6-position carbine buffer tube, paired with a standard AR-15 carbine buffer at 3 oz., a standard AR-15 carbine recoil spring made in the USA, a US Tactical AR-15 and M16 Mil-Spec receiver end plate, and a Mil-Spec AR-15 carbine castle nut. A Magpul DT carbine stock in FDE reinforced polymer made in the USA with a dual tension auto-engaging friction lock, a single ambidextrous adjustment lever, a rotation-limiting integral QD sling socket, a rear 1.25-inch sling loop, a non-slip rubber butt pad with optimized curvature, and a sloping cheek weld profile closes out the rear end.

Key Features

• Delta-M4 No Logo forged 7075-T6 aluminum lower receiver, Type III hardcoat anodized black, Mil-Spec AR-15 pattern, USA made
• Low shelf trigger pocket with M16 cut
• Minimal exterior markings, no logo beneath trigger pocket
• Manufacturer, origin, and serial number markings on side of receiver
• Safe, Semi, and Full Auto selector markings
• Standard AR-15 and STANAG magazine compatible
• Complete Mil-Spec AR-15 lower parts kit with Mil-Spec curved trigger and Mil-Spec A2 grip, black
• Mil-Spec heavy-duty 6-position carbine buffer tube
• Standard AR-15 carbine buffer, 3 oz.
• Standard AR-15 carbine recoil spring, made in the USA
• US Tactical AR-15 and M16 Mil-Spec receiver end plate
• Mil-Spec AR-15 carbine castle nut
• Magpul DT carbine stock, FDE, reinforced polymer, USA made, dual tension auto-engaging friction lock, single ambidextrous adjustment lever, rotation-limiting integral QD sling socket, rear 1.25-inch sling loop, non-slip rubber butt pad with optimized curvature, sloping cheek weld profile, CTR cheek riser compatible, Mil-Spec carbine receiver extension compatible

Perfect For

• AR-15 rifle builders sourcing a complete lower build kit on a USA-made no logo minimal marking lower receiver with a Magpul FDE DT carbine stock included
• Shooters pairing this kit with an existing upper assembly who want a clean no logo lower receiver and a USA-made Magpul FDE DT stock with dual tension friction lock and dual sling attachment options covered in one package
• Builders who want a forged USA-made black lower receiver paired with a Magpul FDE DT carbine stock for a two-tone black and FDE exterior on the lower side

Lower Receiver and Trigger

The Delta-M4 No Logo forged 7075-T6 aluminum lower receiver carries a Type III hardcoat anodized black finish with a Mil-Spec AR-15 pattern, a low shelf trigger pocket with M16 cut, and Safe, Semi, and Full Auto selector markings. The receiver is made in the USA with minimal exterior markings and no logo beneath the trigger pocket, a clean exterior profile for builders who prefer a low-profile or unmarked lower receiver aesthetic. Manufacturer, origin, and serial number markings are present on the side of the receiver as required. The complete Mil-Spec AR-15 lower parts kit covers the full internal lower component group with a Mil-Spec curved trigger at its center and a Mil-Spec A2 grip in black covering the grip interface.

Buffer System and Stock

The Mil-Spec heavy-duty 6-position carbine buffer tube, standard AR-15 carbine buffer at 3 oz., and standard AR-15 carbine recoil spring made in the USA form the complete buffer system at the rear of the lower. The US Tactical AR-15 and M16 Mil-Spec receiver end plate and Mil-Spec AR-15 carbine castle nut lock the buffer tube down cleanly at the rear of the lower receiver. The Magpul DT carbine stock in FDE reinforced polymer, made in the USA, fits directly onto the Mil-Spec carbine buffer tube and closes out the rear end with an adjustable length of pull secured by a dual tension auto-engaging friction lock controlled by a single ambidextrous adjustment lever. The slim ergonomic profile and sloping cheek weld keep the stock compact, and the non-slip rubber butt pad with optimized curvature gives the shooter a consistent and secure shoulder contact point. The rotation-limiting integral QD sling socket and rear 1.25-inch sling loop give the builder two sling attachment options built directly into the stock, and the DT is compatible with CTR cheek risers on fully extended stocks or rifles without rear-facing charging handles. The FDE color of the DT carbine stock provides a contrasting finish against the black anodized lower receiver, giving the lower build a two-tone exterior from receiver to stock.

Follow safe handling and manufacturer instructions. Ensure compliance with all applicable federal, state, and local laws.