0 item(s) in cart/Total: $0

Trinity Force LE Stock AR-15 + Davidson Defense Rise Armament Trigger + Aero LPK with Magpul Grip & Trigger Guard Finish Your Lower Rifle Kit

Trinity Force LE Stock AR-15 + Davidson Defense Rise Armament Trigger + Aero LPK with Magpul Grip & Trigger Guard Finish Your Lower Rifle Kit

review
0
0
5
On sale $169.99
Retail Price:$314.99
Your Savings:$145.00(46%)
In Stock
Part Number:CO-20282
Trinity Force LE Stock AR-15 + Davidson Defense Rise Armament Trigger 
+ Aero LPK with Magpul Grip & Trigger Guard Finish Your Lower Rifle Kit

Davidson Defense 3.5lbs "Phantom" Drop in Trigger 
Manufactured by Rise Armament

Davidson Defense 3.5lbs Drop in Trigger Manufactured by Rise Armament AR-15 M4 3.5-lb Drop-In Match Trigger System 
Match Grade trigger pull at 3.5 lbs consistent made by Rise Armament.

Key Features:
Single-stage trigger system
3.5-lb. pull weight
Clean break with a short reset
Black 8625 hardcoat anodized aluminum cassette
Comfortable rounded, trigger
Manufactured and assembled in Rise Armaments facility according to strict AS9100 aerospace requirements, which are more stringent than standard gun manufacturing requirements
CNC machined from high-grade, heat-treated tool steel and aluminum
Fits most .308 and .223 AR style platforms
Self-contained design makes it easy and quick to install with no fine-tuning needed
Anti-Rotate/anti-walk pins strongly recommended but not required standard pins will work most of the time, but no pins are included.
Note: The set screw should not be tampered with. under the hammer
.154" trigger pins holes, no .170" Colt available

Instructions for installing Drop-In AR-15 and AR-10 trigger group.
1. If installing in a receiver that already has a trigger and hammer installed, remove the trigger pin and hammer pin and remove the trigger and hammer as well as the grip, safety selector and detent. New receivers, install the drop-in trigger before mounting the grip.
2. Insert the trigger pack into the fire control compartment
3. Insert the hammer and trigger pins. Anti-walk type pins work much better, as standard pins can drop out.
4. Towards the center of the trigger cassette you will see two small set screws. With the trigger and hammer pins in place, push the trigger spring towards the center with your Allen wrench and turn those set screws down to raise the trigger the point that there is pressure created on the trigger and hammer pins which will hold them in place. This step is VERY important and will take care of the slight dimensional differences between lower receivers. 
5. Install the retainers on the anti-walk pins
6. Insert the safety selector switch. The hammer needs to be in the cocked position. Take care as it is inserted to not push the selector into the back extension of the trigger. Replace the safety detent, spring and grip.
7. At this point you can test the trigger pull and reset.  

Premium Davidson Defense Anti-Walk Pins

Davidson Defense anti-walk pins are great for drop-in triggers; they replace the original hammer and trigger pins and are retained by special retaining for a positive lock. One side is flared and broached, and the other side is threaded for a screw. Fits small pin lowers (.154"). 

Made of blackened chrome vanadium tool steel
Corrosion-resistant 
Allen wrench is 1/16th
These are some of the best anti-walk pins on the market.
Retained in the gun, so dirt will not cause a stoppage 
The metal is hard, so there will never be any bending or warping.
Great for drop-in triggers and Mil-Spec triggers.
Works with both forged and billet uppers 
The competition’s pins will not work with billet uppers, but ours do. 

Patent pending design 

This is not anti-rotate; it is anti-walk. That means the pins will not fall out.

Parts Included: 
·        One blackened finish stainless steel screw
·        Pins are .154" diameter, and 1.05" long

These pins replace the original hammer and trigger pins. 

Aero Precision AR-15 MOE SL 
Lower Parts Kit Minus FCG - Black

Ready to build out a lower, but wanting to minimize spare parts that might tempt you into yet another build? The Aero Precision lower parts kit for builders is just what you're looking for. This MIL-SPEC parts kit contains all of the small parts you need to get a lower together but drops the parts you were going to toss in your parts bin anyway in favor of aftermarket upgrades. The remaining components are built to proper MIL-SPEC quality for maximum reliability and compatibility.

This AR15 Lower Parts Kit includes the components needed to assemble an Aero Precision AR15 Gen 2 Lower Receiver or similar mil-spec lower receiver. It features a Magpul MOE SL Grip and Magpul MOE Trigger Guard. See below for a full list of included components.

This kit does not include a fire control group, allowing you to build out the rifle you want with the bare minimum of leftovers. 

Kit includes:
Magpul MOE Trigger Guard
Magpul MOE SL Pistol Grip
Takedown/pivot spring
Takedown/pivot detent
Takedown pin
Pivot pin
Bolt catch
Bolt catch spring
Bolt catch buffer
Bolt catch roll pin
Safety selector
Safety selector spring
Safety selector detent
Buffer retainer
Buffer retainer spring
Magazine catch body
Magazine catch spring
Magazine catch button
Pistol Grip Screw
Trigger Guard Roll Pin

Trinity Force L-E Mil-Spec Buffer Tube & Stock
Complete Kit With Recoil Pad

The L-E stock was designed to conform with design parameters for the standard LE style stock found on most Law Enforcement and stock builds. This stock will fit with a Mil-Spec buffer tube and features a quick adjust grip lever and a multiple sling mounts.

The stock kit comes with everything you need to get your rifle up and running including a steel endplate, castle nut, buffer (3oz), buffer spring, and a Mil-Spec anodized aluminum buffer tube. The lightweight construction will ensure that your rifle stays agile and the stock’s ergonomics will augment comfort and efficiency while shooting.

For your safety, Trinity Force recommends this part be installed by a competent, qualified gunsmith/installer with an understanding of the weapon platform that the part is being installed on. Always make sure the firearm is unloaded and pointed in a safe direction when working.

*Buffer Color May Vary

SPECIFICATIONS:
Buffer weight: 3oz
Length (in): 7.7
Receiver Extension Type: Mil-Spec
Length of Pull Range (in): 3.3
Length of Pull Collapsed (in): 12.6
Length of Pull Extended (in): 15.9
Material: Aircraft Grade Aluminum, High Strength Steel, Reinforced Polymer
Color: Black

Please note: If the listing says "In-Stock" it means we have all of the items in stock. Please check this LINK to view our most up to date shipping status.
Warranty, Returns & Terms: Delta Team Tactical offers a 30 day return, refund and exchange policy. You must email or call Delta Team Tactical and obtain an RMA number prior to any return, refund, or exchange. All returns must include the original order number, receipt or invoice, along with the billing address, shipping address, contact phone numbers, contact emails, and RMA number. Returns, refunds, and exchanges may take up to two weeks, not including transit times, for processing after we receive it. Return shipping costs will be the responsibility of the returning party, with the exception of the wrong item being received or on warranty exchange during the first 30 days after delivery. Items returned for warranty will only be replaced or exchanged, not refunded.

Related Items

Recently Viewed Items