Trinity Force LE Stock AR-15 Finish Your Rifle Kit 9mm
KAK Industry Complete Mil-Spec Lower Parts Kit (LPK)
A basic AR-15 lower parts kit. It includes all the small parts needed to complete your lower. You will just need a stock kit and an upper. This kit includes a standard right hand safety selector.
All Fire Control Parts are MPI Tested and Rockwell Tested
Made in the USA
By a major government contractor
Omega Manufacturing AR-15 Lower Parts Kit
The Lower Parts Kit includes:
Black A2 Pistol Grip
Pistol Grip Screw
Pistol Grip Lock Washer
Trigger Guard Roll Pin
Bolt Catch Spring
Bolt Catch Roll Pin
Magazine Catch Button
Magazine Catch Spring
Front Pivot Pin
Pivot Pin Detent Spring
Take Down Detent
Buffer Retainer Pin
Buffer Retainer Spring
AR-15 M4 Charging Handle Mil-Spec Quality
This charging handle is manufactured and assembled by Omega Manufacturing Inc. Omega makes charging handles out of the finest materials for many of the largest gun manufacturers in the world.
Made in the USA
Machined from aluminum 7075 T6 forgings
Complete assembly including latch
Finished in Type III Hardcoat Anodized and Teflon Coated final finish for smoother operation
United Defense Labs Ind. 9mm Ar Bolt Carrier Group
Works With Both Colt & Glock Mag Lower's
The UDL (United Defense Labs) Carrier Group is a Military Intended Design To Bid For Upcoming DOE Contracts.
Designed To Utilize M4 Extractors & Replacement Parts In Current Military Stocked Replacement Parts Along With
Enhancing The Over-All Reliability Of The Ar 9mm As Much As 150% Increasing
The Maximum Rounds That The Weapon Can Fire Without Servicing Or Cleaning.
UDL Designs & Manufactures Parts Intended For Replacements Of Current & Future DARPA Firearm Weapon Parts & Firearms
We At Delta Team Tactical Have Struck A Deal With UDL To Carry All Of The Firearm Parts That They Can Sell To A Civilian Market.
To Exclusively Offer To You The Consumer Parts That Might Just Be In Future Firearms
That Have Been Tested To Rigorous Military Standards Well Above That Of Conventional Firearm Manufacturers Testing.
Built for All 9mm Rifles, Pistols, & SBRâ€™s, UDLâ€™S Ultimate blow-back carriers have many modern improvements that are seen & unseen.
This Includes excess pressure release holes in the carrier that relieve pressure in case of ammunition failure
to reduce the chance of out of battery firing. This feature has never been seen on any other 9mm carrier.
Maintains both COLT/GLOCK Compatibility
Removable counter weight so aftermarket buffer systems may be used like
Jp & Armaspec Buffer Systems.
(Unless Heavier Buffer Is Used Donâ€™t Take Weight Out Unless Directed By Recoil Buffer product MFG Possible Out Of Battery Firing May Occur If Done Without Compensating Buffer System)
Real Full-Auto compatibility while adding amazing new features. Maintains a "ramped" bottom so any common hammer can be used - ideal for competitive shooters and extreme shooters who demand enhanced reliability.
The extractor has been upgraded from an internal 1911-style claw to an M4 Ar-15 Mil-Spec pivoted extractor. Ease of disassembly, enhanced longer life. Carrier key is separate from the charging surface ensuring that the carrier stands up to any vigorous action - meaning no sheared keys.
A standard but higher quality firing pin rounds out the enhancements and keeps this
a 100% user-serviceable bolt carrier using standard sized Colt 9mm Firing Pin & Spring & parts that any regular person can obtain.
Carrier & Integrated Key
Compatibility: GLOCK & COLT - Style Lower Receivers
Carrier: MIL-SPEC 8620 Steel Material
Fully Heat Treated To 1200 HV
External M-16 Style Extractor
M16 (FULL-AUTO) Compatible
Trinity Force L-E Mil-Spec Buffer Tube & Stock
Complete Kit With Recoil Pad
The L-E stock was designed to conform with design parameters for the standard LE style stock found on most Law Enforcement and stock builds. This stock will fit with a Mil-Spec buffer tube and features a quick adjust grip lever and a multiple sling mounts.
The stock kit comes with everything you need to get your rifle up and running including a steel endplate, castle nut, buffer (3oz), buffer spring, and a Mil-Spec anodized aluminum buffer tube. The lightweight construction will ensure that your rifle stays agile and the stock’s ergonomics will augment comfort and efficiency while shooting.
For your safety, Trinity Force recommends this part be installed by a competent, qualified gunsmith/installer with an understanding of the weapon platform that the part is being installed on. Always make sure the firearm is unloaded and pointed in a safe direction when working.
*Buffer Color May Vary
Buffer weight: 3oz
Length (in): 7.7
Receiver Extension Type: Mil-Spec
Length of Pull Range (in): 3.3
Length of Pull Collapsed (in): 12.6
Length of Pull Extended (in): 15.9
Material: Aircraft Grade Aluminum, High Strength Steel, Reinforced Polymer
KAK Industries AR-15 9MM Carbine Buffer
This 9mm buffer is designed to be used on new or converted AR-15 shooting 9mm. Depending on a number of factors including barrel length, a heavier buffer may work much better than the standard 3 oz buffer. It is also used to reduce cycle rate of the AR-15 and felt recoil. This is a 5.4 ounce filled buffer to facilitate correct timing, cycling and firing of 9 mm and 9 mm +P loaded ammunition.
Many 9mm AR-15's need a 5.4-5.8 oz buffer weight of buffer to cycle properly.
While designed specifically for the 9mm, they can be used to slow the cyclic rate of full automatic M-16 rifles/M4
This Buffer is made In the USA by KAK Industries and they are each quality inspected.
Please note: If the listing says "In-Stock" it means we have all of the items in stock. Please check this LINK to view our most up to date shipping status.
Warranty, Returns & Terms:
Delta Team Tactical offers a 30 day return, refund and exchange policy. You must email or call Delta Team Tactical and obtain an RMA number prior to any return, refund, or exchange. All returns must include the original order number, receipt or invoice, along with the billing address, shipping address, contact phone numbers, contact emails, and RMA number. Returns, refunds, and exchanges may take up to two weeks, not including transit times, for processing after we receive it. Return shipping costs will be the responsibility of the returning party, with the exception of the wrong item being received or on warranty exchange during the first 30 days after delivery. Items returned for warranty will only be replaced or exchanged, not refunded.