Davidson Defense Aphelion w/Gauntlet Arms Brace 7.5-inch Pistol-Gas 1:7 5.56 NATO AR-15 Freefloat M-Lok Handguard Pistol Full Build Kit

Aphelion 7.5 Inch 5.56 NATO AR-15 Pistol Full Build Kit with Gauntlet Arms Brace and Black Diamond Billet Upper

7.5 inch 4150 Chrome Moly Vanadium barrel in 5.56 NATO with 1:7 twist rate, contour profile, manganese phosphate finish, pistol length gas system, micro low profile gas block, Black Diamond Series slick side billet upper receiver made from 6061-T6 aluminum with Type III hard coat anodized finish, 7 inch freefloat M-LOK Super Light Series handguard, nitride finished 9310 steel bolt carrier group, mil-spec M4 charging handle, heavy duty pistol buffer tube, 3 oz carbine buffer and spring, Gauntlet Arms polymer stabilizing brace, mil-spec receiver end plate, and GI birdcage flash hider. This pistol full build kit delivers ultra-compact AR-15 performance with all major components needed except the lower receiver.

Key Features

• 7.5 inch 5.56 NATO barrel made from 4150 Chrome Moly Vanadium with contour profile, manganese phosphate finish, and 1:7 twist rate stabilizing bullets from 55 to 77 grains
• Pistol length gas system provides reliable cycling with the shortest standard gas tube length, optimized for barrels under 10 inches
• Black Diamond Series slick side billet upper receiver made from 6061-T6 aluminum with Type III hard coat anodized finish and no forward assist for streamlined profile
• Micro low profile gas block sits flush under the handguard with minimal height
• 7 inch freefloat M-LOK Super Light Series handguard minimizes weight while allowing M-LOK accessory mounting
• Nitride finished 9310 steel bolt carrier group provides enhanced surface hardness and corrosion resistance
• Gauntlet Arms polymer stabilizing brace made from nylon reinforced polymer for durability and light weight
• Complete buffer system includes heavy duty pistol buffer tube, 3 oz carbine buffer, spring, castle nut, and receiver end plate
• 1/2x28 threaded muzzle with manganese phosphate finished GI birdcage flash hider compatible with 5.56 NATO suppressors and muzzle devices

Perfect For

• Ultra-compact builds prioritizing maximum maneuverability in confined spaces
• Backpack or vehicle carry where every inch of length matters
• Shooters wanting a distinctive slick side upper with lightweight components
• Home defense applications in tight quarters where barrel length improves handling

7.5 Inch Pistol Length Configuration

The 7.5 inch barrel length creates an ultra-compact package with significantly reduced overall length compared to standard carbine configurations. The 1:7 twist rate stabilizes heavier 5.56 NATO bullets in the 62 to 77 grain range, though velocities will be substantially reduced compared to longer barrels. The contour profile tapers from chamber to muzzle, balancing weight distribution while maintaining structural integrity. The manganese phosphate finish protects against corrosion and provides a durable non-reflective surface. The pistol length gas system uses the shortest standard gas tube length, positioning the gas port closer to the chamber to ensure adequate gas pressure for reliable cycling with the limited barrel length. The micro low profile gas block sits flush under the handguard without creating a visible hump. Expect significant muzzle flash and concussion with this barrel length, particularly with standard ammunition.

Black Diamond Series Slick Side Billet Upper

The Black Diamond Series billet upper receiver is machined from a solid block of 6061-T6 aluminum and features a slick side design without a forward assist. The absence of the forward assist creates a streamlined profile, reduces weight, and simplifies the upper receiver design. The slick side look appeals to builders who prefer a cleaner aesthetic or who consider the forward assist unnecessary for their intended use. The billet construction allows for precise tolerances and distinctive styling compared to standard forged uppers. The Type III hard coat anodized finish provides superior wear resistance compared to standard Type II anodizing, creating a harder surface that better resists scratches and abrasion from extended use.

Gauntlet Arms Brace and M-LOK Super Light Handguard

The Gauntlet Arms polymer stabilizing brace is made from nylon reinforced polymer for durability while keeping weight down. The brace provides a contact point for stabilizing the firearm and attaches to the included heavy duty pistol buffer tube. The 7 inch freefloat M-LOK Super Light Series handguard extends nearly to the muzzle device on the 7.5 inch barrel, maximizing accessory mounting space while maintaining the compact profile. The Super Light Series design prioritizes weight reduction through optimized material distribution and slimmer wall sections compared to standard handguards. The M-LOK slots on the sides and bottom allow direct attachment of lights, grips, and other accessories using M-LOK compatible mounts without the weight penalty of full length Picatinny rails. The freefloat design means the handguard does not contact the barrel, eliminating pressure points that can shift point of impact as the barrel heats.

Nitride Bolt Carrier Group and Buffer System

The 9310 steel bolt carrier group features nitride finish across all surfaces, providing superior corrosion resistance and lubricity compared to traditional phosphate finishes. The nitride process diffuses nitrogen into the steel surface, creating a hardened layer that resists wear and reduces friction. This means smoother cycling, easier cleaning, and longer component life. The mil-spec M4 charging handle provides standard ergonomics and reliable operation. The complete buffer system includes the heavy duty pistol buffer tube, 3 oz carbine buffer, standard AR-15 carbine recoil spring, castle nut, and mil-spec receiver end plate. The standard carbine buffer weight is appropriate for the pistol length gas system, providing reliable cycling while managing bolt carrier velocity.

Follow safe handling and manufacturer instructions. Ensure compliance with all applicable laws. Lower receiver not included.