DIY Pistol Kits: JE Machine Slide Parts Kit for Glock G17 + Strike Industries Gen 3 Standard Mass Driver Comp for Glock 17

JE Machine has assembled this convenient Glock Slide Parts Kit, perfect for anyone building a Polymer80 80% Glock slide in 9mm Luger. The kit includes all the necessary G17 parts for a functional pistol, less a frame, magazine, and slide assembly. Glock-compatible parts are brand new and machined to precise specifications. Get all your hard-to-find replacement parts in one handy kit! Also perfect for a Glock Armorer's kit!

FEATURES:

Complete slide parts kit for the G17 Glock (does not include frame, locking block, or magazine)

Compatible with Polymer80 Frames

INCLUDES:

Firing pin

Firing pin spring

Firing pin spring cup

Firing pin safety

Firing pin safety spring

9mm Extractor

Extractor depressor plunger

Extractor depressor plunger spring

Channel liner

Spacer Sleeve

Steel cover plate

Polymer guide rod (guide rod, washer, screw)

Guide rod spring

The Strike Industries Mass Driver Compensator (MDC) represents a quantum leap in compensator design. Current designs have largely been unchanged since the 1930s. It's about time for something revolutionary. The Mass Driver name is inspired by the idea of theoretical mass driver engines in space travel. By ejecting mass, an equal and opposite reaction is generated propelling the space vehicle forward. The Mass Driver Compensator is driven by the hot gasses expelled through the barrel after the round is discharged and acts as a counterbalance system to attenuate mechanical recoil. Barrel-mounted compensators add reciprocating mass and increase the moment of inertia to the operating system, which can hurt the reliable cycling of recoil-operated handguns. By separating the compensator from the operating components after ignition, the MDC allows for close-to-stock cyclic speeds and reduces reciprocating mass. The compensator of the MDC system has a widened bore to reduce baffle strikes and keyholing rounds along with a 2.5mm relief cut at the top of the rear to reduce "lipping" and damage to the face of the pistol slide.

Threaded Barrels: Yes, the Mass Driver Comp is compatible with most GLOCK aftermarket threaded barrels. We've tested with the majority of the popular brands on the market but not all. However, we recommend using non-threaded barrels if possible.

COMPATIBILITY:

-For GLOCK GEN3, GEN4 or GEN5 G17 (compact)

-Holsters: SI Mass Driver Comp sits flush with OEM GLOCK slides and can be used in most open-ended holsters that accommodate compensators

NOTE:

-Recommended torque value for the guide rod nut is 25 lbs/in.

-Use with +P and +P+ 9mm ammo will produce premature internal spring wear and cause failure