Body Armor Bundle: VISM Fast Plate Carrier + VISM Tactical Hard Ballistic Panel For Body Armor - Level III+, 2- Pack

Adjustable for length 2" side straps with large quick-connect plastic buckles that can be extended from 30"L out to 60"L.

The quick connect buckles allow you to quickly and easily get the Fast plate carrier onto your body.

Quick connect buckles and the adjustable strap are positioned for easy access while being worn.

PALs webbing on the front & back panels allows the attachments of MOLLE accessories like holsters, magazine pouches, radio/utility pouches, and other essential gear.

Adjustable for length Shoulder straps with large heavy-duty quick-connect buckles with hook and loop fasteners.

Includes two padded shoulder covers with PALs webbing, hook and loop fasteners, and loops for communications cabling routing.

The top of the front and rear panel 10.0" W X 4.0"H loop fastener patch areas for attaching Department/Unit patches, name tapes, and moral patches to the front and rear panels.

The front and rear panels also feature hook and loop fasteners loops on both sides for communications cabling routing.

The Heavy Duty drag handle webbing extends from the top of the rear panel to nearly the bottom of the rear panel on both sides for strength and durability.

Made with tough and durable 1050 Nylon material the Fast plate carrier is water and chemical resistant.

Double and re-enforcement cross stitching in critical areas.

Hard Armor panels are great for increased protection, used by modern militaries, police, and civilians, hard armor plates comprised of Ceramic, Steel, Titanium, and other Composite armor panels are used widely in modern shell vests, plate carriers, and bags. Not all hard panels have a spall liner, but in the case of impact from a projectile, a spall liner is designed to catch or deflect the jacket from the projectile on impact. This in turn reduces the possibility of shrapnel injuries. Hard Armor panels typically made with ceramics are lighter weight, and plates made from steel are heavier. The trade-off between mobility and protection is worth it!

About this Armor: Shield and protect yourself from some serious calibers when equipped with the VISM Polyethylene Hard Ballistic Plate. These Armor Plates designed by VISM are rated at Level III Plus which is capable of stopping 7.62x51mm, 7.62x39mm, and 5.56x45mm rounds. However, please note that these plates are NOT NIJ rated - this is NcStar's rating system. This VISM PE Ballistic Hard Plate is constructed from Ultra High Molecular Weight Polyethylene (UHMWPE) that offers avid protection with lightweight properties for maximum mobility. A curved design provides optimal comfort for operations, and each plate is completely sealed for protection against liquids and harsh chemicals you may come in contact with. Stay safe and active on any mission when wearing this VISM PE Ballistic Hard Protective Plate that is ideal for use with VISM plate carriers.

Armor Level: Level III+ - Tested to Stop 9x19, .357 Magnum, .357 SIG, and .44 Magnum rounds fired from longer barrel handguns & pistol caliber sub guns. This also includes rifle calibers up to .223 Remington, 5.56 NATO, and 7.62mm Lead Core rifle ammunition.

Plate Size: 10"x12" - This is an average-size plate for medium-sized torsos.

Material: Composite - Constructed of Ultra High Molecular Weight Polyethylene (UHMWPE) creating a lightweight ballistic plate.

Spall Liner: Spall Liners are an addition to a plate of armor and come in a few different forms, this is either a lip at the end of the plate or a hard rubber coating designed to grab and decelerate the jacket of a projectile as it disintegrates.

Plate Cut: Shooter's Cut - Shooters Cut plates are cut to accommodate a plate carrier for both left and right-handed shooters, allowing you the upper body flexibility that you will need when out in the field.

Type: Hard Panel - Hard Panels use rigid, sturdy materials that are non-flexible.

Hard Armor panels are great for increased protection, used by modern militaries, police, and civilians, hard armor plates comprised of Ceramic, Steel, Titanium, and other Composite armor panels are used widely in modern shell vests, plate carriers, and bags. Not all hard panels have a spall liner, but in the case of impact from a projectile, a spall liner is designed to catch or deflect the jacket from the projectile on impact. This in turn reduces the possibility of shrapnel injuries. Hard Armor panels typically made with ceramics are lighter weight, and plates made from steel are heavier. The trade-off between mobility and protection is worth it!

About this Armor: Shield and protect yourself from some serious calibers when equipped with the VISM Polyethylene Hard Ballistic Plate. These Armor Plates designed by VISM are rated at Level III Plus which is capable of stopping 7.62x51mm, 7.62x39mm, and 5.56x45mm rounds. However, please note that these plates are NOT NIJ rated - this is NcStar's rating system. This VISM PE Ballistic Hard Plate is constructed from Ultra High Molecular Weight Polyethylene (UHMWPE) that offers avid protection with lightweight properties for maximum mobility. A curved design provides optimal comfort for operations, and each plate is completely sealed for protection against liquids and harsh chemicals you may come in contact with. Stay safe and active on any mission when wearing this VISM PE Ballistic Hard Protective Plate that is ideal for use with VISM plate carriers.

Armor Level: Level III+ - Tested to Stop 9x19, .357 Magnum, .357 SIG, and .44 Magnum rounds fired from longer barrel handguns & pistol caliber sub guns. This also includes rifle calibers up to .223 Remington, 5.56 NATO, and 7.62mm Lead Core rifle ammunition.

Plate Size: 10"x12" - This is an average-size plate for medium-sized torsos.

Material: Composite - Constructed of Ultra High Molecular Weight Polyethylene (UHMWPE) creating a lightweight ballistic plate.

Spall Liner: Spall Liners are an addition to a plate of armor and come in a few different forms, this is either a lip at the end of the plate or a hard rubber coating designed to grab and decelerate the jacket of a projectile as it disintegrates.

Plate Cut: Shooter's Cut - Shooters Cut plates are cut to accommodate a plate carrier for both left and right-handed shooters, allowing you the upper body flexibility that you will need when out in the field.

Type: Hard Panel - Hard Panels use rigid, sturdy materials that are non-flexible.