Chambered for 5.56x45 NATO, originally derived from .223 Remington, 5.56 NATO is the standardized and most popular cartridge developed for the AR-15 platform. Utilizing a .22 Caliber projectile, the low mass, high-velocity cartridge allows superior weapon handling with manageable recoil and high accuracy. With a wide variety of ammunition choices on the market, 5.56 NATO chambered AR-15s are 'multi-caliber' and can reliably fire both 5.56x45 NATO and .223 Remington cartridges.
Included Is A 7.5" Barrel From ELD Performance Chambered In 5.56 NATO. Made From 4150 CMV QPQ Nitride With A Nitride Finish, This Barrel Has a 1-7 Twist Rate With A 1/2x28 Thread Pitch.
This A2 flash hider has a classic and effective design. Flash hiders are essential in position concealment and keeping your vision clear; especially in low light situations. This design has a flat bottom which means the gasses won’t kick up dust because they are directed up and to the sides. It has a 1/2x28 thread pitch and a Manganese Phosphate finish to protect it from corrosion. This A2 flash hider is a classic because it simply does a great job.
The Davidson Defense Black Diamond Series AR-15 Billet Upper Receiver is machined from Billet 6061-T6 Aluminum. It is incredibly durable and has a deep black anodized finish that gives any build a classic look and feel. This upper receiver features a full 1913 Picatinny rail for easy installation of accessories. It has M4 feed ramps and a standard dust door. This rugged upper receiver is high-strength and corrosion-resistant making it the perfect addition to almost any AR-15 build.
A USA Made Premium 7" "Black Diamond" Executive Grade M-Lok Handguard. Made Of 6061 T6 Aluminum And Type III Mil-Spec Anodized.
Davidson Defense is constantly pushing the boundaries to find high-quality and affordable USA-made products and accessories for your first/next custom AR-15 build. Introducing the Davidson Defense AR-15 Custom Engraved Stripped Lower Receiver. A Custom Engraved Davidson Defense Mfg. logo is on the side-magwell of the Lower Receiver. M16/M4 Mil-Spec Cerro Forged 7075 T6 Aircraft-Aluminum this lower exhibits high strength, toughness, and good resistance to fatigue and stress. The finish is Type III Hard Coat Anodized, which provides an exceptionally hard and durable coating that helps in providing unbeatable corrosion and abrasion protection. Each Lower is engraved with multi-Caliber while also including the safety selector options of ‘Fire’ and ‘Safe’. Davidson Defense spent weeks, if not months, meticulously designing and constructing this Lower Receiver to meet Mil-Spec requirements ensuring you that this critical AR Component is of the highest quality.
This 5.56 NATO Slabside Complete BCG has a simple, classic design. It is machined from 9310 steel which means this BCG is tough and durable. The nitride finish helps make it resistant to corrosion and increases its strength. It has been MPI and HPT tested to ensure its quality. All of these characteristics make this a high-quality, durable BCG.
This AR-15 M4 Charging Handle is machined from 7075 T6 aluminum and has a Type III hard coat anodized finish. This means that this is one strong, durable, and reliable charging handle. The Teflon coating on the handle makes it resistant to corrosion and waterproof. The complete assembly includes the latch. This charging handle is small but mighty.
Getting all the parts you need to complete your lower can be extremely tedious. Lower parts kits take all the guesswork out of finishing your lower because all the pieces you need are included. This USA-made KAK Industries Complete Mil-Spec Lower Parts Kit comes with a standard right-hand safety selector. The fire control parts are MPI and Rockwell tested to ensure these parts meet the quality standards. This lower parts kit is the key to effortlessly completing your lower.
Included Is A Premium KAK Industries Shockwave 2.0 Adjustable Pistol Stabilizer Blade. This Pistol Stabilizer Brace Is Made From High Strength Glass-Reinforced Polymer. The Adjustable Blade 2M Pistol Stabilizer Has Been Made To Exacting Tolerances And Is Able To Fit All Pistols Equipped With A Mil-Spec Buffer Tube. Easy To Install, Just Slip It On And Lock In Place, This Pistol Brace Adjusts With A Simple Finger Lever. Made In The USA And Designed By Veterans, This Brace Is Approved For Use By The ATF As Well. Also, Included Is An Omega Manufacturing Mil-Spec Buffer Tube Kit.
The Polymer80 Compact AFT Kit has everything needed to build a complete P80 handgun. This kit was designed with DIY enthusiasts and hobbyists in mind, or anyone wanting to learn how to assemble a pistol. The frame is made from high-strength polymer that comes in a deep, classic Grey. This kit also includes a 15-round magazine, black carrying case, and assembly instructions. These kits are high-quality, look incredible, and make a fun-to-shoot build. Grab a kit today and begin "assembling for thyself".
*This kit includes a serialized P80 frame.*
Kit Includes:PF-Series Serialized FrameLBRS (Locking Block Rail System) & RRM (Rear Rail Module)9mm Complete Slide AssemblyStainless Steel Slide w/ Black Nitride CoatingStainless Steel Barrel w/ Black Nitride CoatingP80 Slide Parts KitP80 Standard SightsP80 Pistol Parts Kit w/ Trigger15 round MagazineBlack Carrying CaseAssembly Instructions
