1. FDE Combo: Magpul AR-15 MOE Carbine Stock + TacFire 1x30 Dual-Illuminated Red Dot Sight w/ Cantilever Mount + Strike Industries LINK Anchor Polymer Hand Stop

FDE Combo: Magpul AR-15 MOE Carbine Stock + TacFire 1x30 Dual-Illuminated Red Dot Sight w/ Cantilever Mount + Strike Industries LINK Anchor Polymer Hand Stop

Part Number: CO-83473
Write a Review
On sale $129.99 $79.99
Retail Price:$129.99
Your Savings:$50.00(38%)
25 left In Stock!
Availability: In Stock
FDE Combo: 
Magpul AR-15 MOE FDE Carbine Stock
+ TacFire 1x30 Dual-Illuminated Red Dot Sight w/ Cantilever Mount
+ Strike Industries LINK Anchor Polymer Hand Stop



Magpul MOE FDE Carbine Stock, AR-15, For Mil-Spec Tube

The MOE Stock - Mil-Spec Model (Magpul Original Equipment) is a drop-in replacement buttstock for AR15/M16 carbines using mil-spec sized receiver extension tubes. Designed for light, fast action the streamlined A-frame profile avoids snagging and shields the release latch to prevent accidental activation. The Mil-Spec Model includes a standard 0.30" thick rubber butt-pad which provides positive shoulder purchase to prevent slippage even with body armor or modular gear.

FEATURES:
Replaceable 0.30" Rubber Butt-Pad
Compatible with Magpul ASAP(R), ASAP(R) QD, and other receiver-mount sling attachments

SPECIFICATIONS:
Type: Mil-Spec
Model: MOE Carbine Stock
Color: FDE

Part Number: SK-31674


TacFire 1x30 Dual-Illuminated Red Dot Sight w/ Cantilever Mount - FDE

Red Dot Sights have their origin from aircraft gunsights or 'collimators' where the shooter's reticle is projected on a clear lens/glass pane allowing for easier target acquisition and a clearer sight picture of a target, later adapted for small arms rifles, red dots exist to be incredibly sturdy, and reliable open sight picture 'optics'. Red Dot Sights(RDS) allow for faster target acquisition due to their wide-open glass nature and featuring almost unlimited eye relief as the projected reticle is reflected off of the glass and back into the shooter's eye. meaning you can see your point of aim from almost anywhere on a rifle or pistol. The AR-15 platform was adapted for use with these aiming systems back in the late 80s where the carry handle was being sidelined in favor of the distinct Flat-Top / Picatinny rail system.

About this Sight System: The TacFire 1x30 Tactical Dual-Illuminated Red Dot Sight w/ Cantilever Mount is designed of shock-resistant 6061-T6 aircraft aluminum housing and durable enough to withstand the harshest recoil. These Red Dot Sights by Tacfire have a red and green illuminated reticle with three brightness settings for each reticle color. The multi-coated and scratch-resistant lenses of the TacFire 1x30 Illuminated Dot Sight w/ Cantilever Mount provides high quality and clarity with optimum light transmission. With a 30mm objective and unlimited eye relief, the TacFire 1x30 Red and Green Illuminated Dot Sight, w/ Cantilever Mount is built for fast and accurate target acquisition, so all of your shots can be made in confidence.

Magnification: This is a Non-Magnified Gunsight and has a true 1x sight picture.

Illumination: The tube for the TacFire Red Dot can be illuminated in both red and green for contrast against low visibility targets.

Reticle Type: The TacFire Red Dot utilizes a standard red dot reflex display for accurate sighting and shooting.

Battery Type: This optic uses a standard CR2032 cell battery.

Eye Relief: Due to the nature of reflex sights, there is nearly unlimited eye relief with this style of the optic.

MANUFACTURER INFO:
Magnification: 1x
Objective: 24x34
Eye Relief: Unlimited
Length: 3.25 in
Net Weight: 4 oz.
Lens Color: Ruby
Material: Anodized Aircraft-Grade Aluminum

SPECIFICATIONS:
Brand: TacFire
Optic Type: Red Dot
Model: 1x30 Dual-Illuminated Red Dot Sight w/ Cantilever Mount - FDE
Magnification: 1x
Illumination: Yes
Illumination Color: Red
Battery Type: CR2032
Lens Diameter: 30mm
Objective Lens Diameter:
MOA-Adjustments: 1-MOA Click
Reticle: Dot
Turrets: Capped
Accessories Included: Lens Caps, Cover

Part Number: ST-80051-FDE



Strike Industries LINK Anchor Polymer Hand Stop - FDE

For extra guidance on the fore-end of your AR-15, hand stops were developed in multiple different designs. This usually incorporates a hard stop wall for your hand to not extend past the muzzle, a finger groove to index your fingers properly on your handguard, or an aggressive slanted surface to brace against barriers and obstacles. Handstops help the shooter safely manipulate or place one's hand on the handguard of their AR-15.

About this Foregrip: The LINK Anchor Handstop is made from a heat-resistant polymer that allows comfortable grip in any shooting condition. It has a low-profile design that allows mounting through any MLOK or KeyMod openings. The unique tooth design allows the hand stop to be reversible, giving the option for either a "push" or "pull" style grip. With the added ridges on the surface, the LINK Anchor provides unmatched dexterity from your palm to your fingertips. A true lightweight modification that is not only comfortable, has an aggressive look, and will improve accuracy over time by stabilizing your grip.

Material: Polymer - This grip uses a polymer construction with steel fasteners.

Attachment Style: M-Lok - This grip uses the M-Lok attachment method.

FEATURES:
Aggressive ergonomic grip with ridges to enhance dexterity
Low profile, lightweight, heat resistant design
LINK attachment system
Multi-directional attachment capabilities
Compatible with all MLOK / Keymod Handguards

SPECIFICATIONS:
Brand: Strike Industries
Grip Type: Handstop, Barrier Brace
Model: LINK Anchor Polymer Hand Stop - FDE
Grip Texture: Grooved
Material: Polymer
Color: FDE
Attachment Type: M-Lok

Part Number: 36443


Please note: If the listing says "In-Stock" it means we have the item(s) in stock. Please check this LINK to view our most up-to-date shipping status. Warranty, Returns & Terms: Delta Team Tactical offers a 30 day return, refund and exchange policy. You must email or call Delta Team Tactical and obtain an RMA number prior to any return, refund, or exchange. All returns must include the original order number, receipt or invoice, along with the customers billing address, shipping address, contact phone numbers, contact emails, and RMA number. Returns, refunds, and exchanges may take up to two weeks, not including transit times, for processing after we have received return product. Return shipping costs will be the responsibility of the returning party, with the exception of the wrong item being received or on warranty exchange during the first 30 days after delivery. Items returned for warranty will only be replaced or exchanged, no refund given on warranty items.

Recently Viewed Items

TOP
0 Items