Chambered for 5.56x45 NATO, originally derived from .223 Remington, 5.56 NATO is the standardized and most popular cartridge developed for the AR-15 platform. Utilizing a .22 Caliber projectile, the low mass, high-velocity cartridge allows superior weapon handling with manageable recoil and high accuracy. With a wide variety of ammunition choices on the market, 5.56 NATO chambered AR-15s are 'multi-caliber' and can reliably fire both 5.56x45 NATO and .223 Remington cartridges.
Included Is A 16" 5.56 NATO Barrel From ELD Performance As Part Of Their Alpha Series. Made From 416R Stainless Steel, This Barrel Has A 1/2x28 Thread Pitch And A 1-8 Twist Rate.
This A2 flash hider has a classic and effective design. Flash hiders are essential in position concealment and keeping your vision clear; especially in low light situations. This design has a flat bottom which means the gasses won’t kick up dust because they are directed up and to the sides. It has a 1/2x28 thread pitch and a Manganese Phosphate finish to protect it from corrosion. This A2 flash hider is a classic because it simply does a great job.
This upper receiver makes a great addition to an AR-15 build. It is made from 6061-T6 aluminum which makes it incredibly strong and corrosion-resistant. The anodized finish increases the strength of the aluminum making it less susceptible to wear and tear. It has a sleek, standard Mil-Spec design with a 1913 Picatinny rail. This upper receiver has a standard ejection door and no forward assist. This classic upper receiver will do its job and do it well.
This handguard is crafted from 6061-T6 aluminum which is strong and durable. The matte black anodized finish makes this handguard resistant to corrosion and increases the handguard’s overall strength. The sleek design makes it lightweight while keeping it robust. This easy-to-install handguard includes a barrel nut made out of 7079-T6 aluminum. Every inch of this handguard exceeds expectations.
Davidson Defense is constantly pushing the boundaries to find high-quality and affordable USA-made products and accessories for your first/next custom AR-15 build. Introducing the Davidson Defense AR-15 Custom Engraved Stripped Lower Receiver. A Custom Engraved Davidson Defense Mfg. the logo is on the side-magwell of the Lower Receiver. M16/M4 Mil-Spec Cerro Forged 7075 T6 Aircraft-Aluminum this lower exhibits high strength, toughness, and good resistance to fatigue and stress. The finish is Type III Hard Coat Anodized, which provides an exceptionally hard and durable coating that helps in providing unbeatable corrosion and abrasion protection. Each Lower is engraved with multi-Caliber while also including the safety selector options of ‘Fire’ and ‘Safe’. Davidson Defense spent weeks, if not months, meticulously designing and constructing this Lower Receiver to meet Mil-Spec requirements ensuring you that this critical AR Component is of the highest quality.
This 5.56 NATO Slabside Complete BCG has a simple, classic design. It is machined from 9310 steel which means this BCG is tough and durable. The nitride finish helps make it resistant to corrosion and increases its strength. It has been MPI and HPT tested to ensure its quality. All of these characteristics make this a high-quality, durable BCG.
This AR-15 M4 Charging Handle is machined from 7075 T6 aluminum and has a Type III hard coat anodized finish. This means that this is one strong, durable, and reliable charging handle. The Teflon coating on the handle makes it resistant to corrosion and waterproof. The complete assembly includes the latch. This charging handle is small but mighty.
Getting all the parts you need to complete your lower can be extremely tedious. Lower parts kits take all the guesswork out of finishing your lower because all the pieces you need are included. This USA-made KAK Industries Complete Mil-Spec Lower Parts Kit comes with a standard right-hand safety selector. The fire control parts are MPI and Rockwell tested to ensure these parts meet the quality standards. This lower parts kit is the key to effortlessly completing your lower.
We’re not all built the same, so why should our stock be? The Adaptive Tactical AR-15 EX Performance Adjustable Stock has easy-to-reach adjustment levers that allow users to adjust to the proper length of pull. Adjustable stocks are also an advantage in situations where groups of people are using the same rifle. The sling loops are molded into the stock so rusting won’t occur. There are also QD mounts with an oversized, high-strength adjustment pin. The non-slip, vented rubber buttpad provides extra grip and helps reduce felt recoil. The slick, innovative design is high strength and can easily be installed using household tools.
Polymer80 Complete Pistol - PFS9 features a new, innovative design to enhance the concealed carry experience. It is constructed from reinforced polymer and includes the standard, aggressive texture for optimal grip. The complete slide features clean, modern lines and is designed for improved holstering and movement. The overall aesthetic and low-profile design makes this complete pistol a must-have. Featuring a 17+1 magazine capacity with night front sights and blacked-out rear sights. This also comes with a carrying case with foam inserts.
Important FFL Requirements:
This item is an FFL-restricted shipping product. You must arrange shipment of this product to a qualified FFL dealer.
Serialized products are subject to a non-refundable $4.00 handling fee.
If you would like to have your order processed faster, please see our HOW TO: Purchasing Serialized Parts.
If In California, or are unsure if we can ship to you, please view our Warranty, Returns, Terms, and Conditions to see restrictions.
All Receivers Are Shipped As Long Arms To The State Of California, 21 Years Of Age Required As Well
