1. Home
  2. Shop All
  3. AR-15 / AR-10 Parts and Accessories
  4. Lower Parts
  5. Stripped Lower Receivers
  6. Lower Receiver 3-Pack: Spike's Tactical Stripped Lower W/ Spider Logo 9mm + .308 M5 Bare Stripped Lower Receiver - DPMS Cut + Davidson Defense Engraved AR-15 Lower Receiver

Lower Receiver 3-Pack: Spike's Tactical Stripped Lower W/ Spider Logo 9mm + .308 M5 Bare Stripped Lower Receiver - DPMS Cut + Davidson Defense Engraved AR-15 Lower Receiver

Part Number: S-CO-84076
Write a Review
On sale $584.99 $399.99
Retail Price:$584.99
Your Savings:$185.00(32%)
0 left In Stock!
Availability: Waitlist
Lower Receiver 3-Pack:
Spike's Tactical Stripped Lower W/ Spider Logo 9mm
+ .308 M5 Bare Stripped Lower Receiver - DPMS Cut
+ Davidson Defense Engraved AR-15 Lower Receiver

Spike's Tactical Stripped Lower W/ Spider Logo 9mm

AR-15 Lowers are the heart of the rifle, housing the fire control components, mounting your recoil assembly, stock, and buffer. Thanks to the modular design the AR15 platform is a proven and battle-tested design that certainly lives up to the durability and standards of its operating nations. AR-9 Lowers Use a few non-standard parts not found in typical LPK Packs, Such as the ejector assembly that is incorporated into the lower, the mag release paddle, roll-pin, and spring associated with it. AR-9 Lowers have adapted to using Glock Magazines with Glock Magwells incorporated.

About This Lower: The Spike's Tactical Spider 9mm Lower is the perfect foundation for a pistol-caliber carbine build. Fully compatible with most standard AR-15 parts, this lower includes a proprietary magazine catch assembly, ejector factory-installed, and last round bolt hold open functionality. Features the Spike’s Spider logo engraved prominently on the left side of the magwell. Spike’s Tactical stripped lowers are made to the highest standards. If you are planning a build or just putting lowers away for a rainy day, you can't go wrong with Spike's lower receivers.

About This Brand: Strike Industries, always innovating and providing the best quality firearms accessories at the best prices since 2010.

Finish: Hardcoat Anodized - This Lower Receiver has had a Hardcoat Anodizing Layer applied to the surface to protect and strengthen the 7075 Aluminum Forging

Features:

Dedicated Glock magazine well

Spike's Spider logo with Bullet Pictogram selector markings

7075-T6 forged receiver

MIL-A-8625F Type III Class 2 hardcoat anodized finish

Built-in trigger guard

Proprietary parts factory installed

Oversized magazine release button

Weight: 15 oz

Non-CA compliant includes integral magazine release

Features last round bolt hold open


.308 M5 Bare Stripped Lower Receiver - DPMS Cut

LR-308 Lowers are the heart of the rifle, housing the fire control components, mounting your recoil assembly, stock and buffer. Thanks to modular design the LR-308 platform is a proven and battle-tested design that certainly lives up to durability and standards of its operating nations. Typically Mil-Spec Lower Receivers are typically machined from a forging of 7075-T6 Aluminum. Offering a Lightweight and and incredibily durable/impact resistant weapons grade material. The LR-308 is a derivative of the AR-10 and is not directively compatible with AR-10 Style Upper Receivers. LR-308 lowers incorporate a 'DPMS' style cut in the lower 's buffer tower and upper receiver.

About This Lower: Aero Precision's M5 .308 Stripped Lower Receiver helps you build a big-bore AR from the ground up. Mil-spec dimensions and coating ensure the highest quality and correct component interface. The rear takedown pin detent hole is threaded for a 4-40 set screw; bolt catch is threaded for a screw pin (no roll pin needed); selector markings work with 45, 60, or 90 degree standard safety selectors; and there is no gap with aftermarket pistol grips. The M5 308 stripped lower has an integrated trigger guard, and includes a Nylon-tipped tensioning set screw. It is compatible with standard DPMS LR-308 components and magazines. This model has a black hard coat anodized finish.

About This Brand: Aero Precision's roots are deeply tied to aerospace, and their drive for clean, perfect engineering and machining stems from that. When you're building something that will fly in the air, there is no margin for error. Aero Precision takes that same approach in the firearms industry. Not every manufacturer will have razor thin tolerance levels. Not every manufacturer will personally oversee the development, design, and machining of every part that comes off the line. Aero Precision is not every manufacturer.

Finish: Hardcoat Anodized - This Lower Receiver has had a Hardcoat Anodizing Layer applied to the surface to protect and strengthen the 7075 Aluminum Forging

Features: Works with standard LR-308 components and magazines -Upper Tension Screw - Allows users to fine tune the fit of the upper and lower receiver through the use of a nylon tipped tensioning set screw inserted in the grip tang of the lower receiver. -Rear takedown pin detent hole is threaded for a 4-40 set screw -Bolt catch is threaded for a screw pin (no roll pin needed) -Integrated trigger guard -Selector markings will work with 45, 60 or 90 degree safety selectors -Accepts Battle Arms Development short throw safety selectors, but will work with any standard selector -No gap with aftermarket pistol grips


Davidson Defense Engraved AR-15 Lower Receiver

AR-15 Lowers are the heart of the rifle, housing the fire control components, mounting your recoil assembly, stock and buffer. Thanks to modular design the AR15 platform is a proven and battle-tested design that certainly lives up to durability and standards of its operating nations. Typically Mil-Spec Lower Receivers are typically machined from a forging of 7075-T6 Aluminum. Offering a Lightweight and and incredibily durable/impact resistant weapons grade material.

About This Lower Receiver: Davidson Defense is constantly pushing the boundaries to find high-quality and affordable USA-made products and accessories for your first/next custom AR-15 build. Introducing the Davidson Defense AR-15 Custom Engraved Stripped Lower Receiver. A Custom Engraved Davidson Defense logo is on the lower and combined with a classic Spartan-like helmet. M16/M4 Mil-Spec Cerro Forged 7075 T6 Aircraft-Aluminum this lower exhibits high strength, toughness, and good resistance to fatigue and stress. The Finish is Type III Hard Coat Anodized, which provides an exceptionally hard and durable coating that helps in providing unbeatable corrosion and abrasion protection. Each Lower is engraved with multi-Caliber while also including the safety selector options of 'Fire' and 'Safe'. Davidson Defense spent weeks if not months into meticulously designing and constructing this Lower Receiver to meet Mil-Spec requirements ensuring you that this critical AR Component is of the highest quality.

About This Brand: Headquartered in the beautiful Wasatch Valley just south of Salt Lake City, Utah. Davidson Defense INC. Is an FFL licensed retailer and manufacturer of specialty parts and accessories for the modern sporting rifle. Founded and operated by enthusiasts with diverse backgrounds and decades of experience in the firearms industry. We are able to provide the absolute best prices and selection to our wide customer base. While the majority of our business is conducted online, we also operate a local gun shop in Orem, Utah with a large selection of firearms, ammunition and parts."

Finish: Hardcoat Anodized - This Lower Receiver has had a Hardcoat Anodizing Layer applied to the surface to protect and strengthen the 7075 Aluminum Forging

Important FFL Requirements:This item is a FFL restricted shipping product. You must arrange shipment of this product to a qualified FFL dealer.

Serialized products are subject to a non-refundable $4.00 handling fee.

If you would like to have your order processed faster, please see our HOW TO: Purchasing Serialized Parts.

If In California, or are unsure if we can ship to you, please view our Warranty, Returns, Terms and Conditions to see restrictions.

All Receivers Are Shipped As Long Arms To The State Of California, 21 Years Of Age Required As Well

To view the most up-to-date shipping times Click HERE.
To view Warranty, Returns, Terms & Restrictions Click HERE.

Related Items

Recently Viewed Items

TOP
0 Items