Q: Soooo this will not fit a AR/M4 with a front sight post...or it will..??? The description is very confusing. Especially what you believe is a Delta ring. 7 inches on a Standard handguard, mil spec of course.. I have a PSA M4/AR/ M16 style complete upper. I am thinking of drilling the plastic handguards to mount a light or 3" picatanny rail, then the light. But if this will fit...than cool. Also it says Lazer engraved, I am assuming that these are aluminum.

Asked by: Murphyzlaw - 12/18/2023
A: This should fit a AR/M4 with a front sight post as long as it is carbine length.
Answer provided by: DTT (1/3/2024)
Submit an answer

Q: Does this come with barrel nut?

Asked by: Skiwalker - 12/15/2023
A: No, it does not come with a barrel nut.
Answer provided by: DTT (1/3/2024)
Submit an answer

Q: What is the inside diameter of the quad rail?

Asked by: Mark - 12/1/2023
A: It will clamp on a delta ring. The inside diameter will depend on the delta ring.
Answer provided by: DTT (1/19/2024)
Submit an answer

Q: Does this come with the hand guard cap?

Asked by: Jacob - 8/4/2023
A: No, it does not come with the handguard cap.
Answer provided by: DTT (8/8/2023)
Submit an answer

Q: Will this hand guard fit on a DPMS 308 low profile carbine length rifle? Will it clamp around the front cap as it says it will in an ar15 application

Asked by: John s - 5/9/2023
A: This handguard will not fit a LR308 because it is an AR-15 platform and they are not compatible.
Answer provided by: DTT (6/14/2023)
Submit an answer

Q: Will this fir a smith&wesson m&p15? Current handguard measures 6"

Asked by: Clay B - 1/24/2023
A: Yes it should fit because they are both an AR-15 platform. Make sure the length of this handguard matches what is needed.
Answer provided by: DTT (6/14/2023)
Submit an answer

Q: Once installed, should the top picatinny rail align in the same height to match the top picatinny of an attached MIl-Spec upper receiver? Also, does this handcover come with an anti-rotation feature? Thank you.

Asked by: AR Noob - 1/21/2023
A: Yes this handguard should align with the upper. No it does not have anti-rotation feature.
Answer provided by: DTT (6/14/2023)
Submit an answer

Q: So the gas block that I have is a regular gas block but for most people I’ve seen with this hand guard there gas block has a triangular piece above it. So am I able to still use this even tho my bad block doesn’t have that triangle piece??

Asked by: Carlos - 1/19/2023
A: No, it will not work without a triangle piece.
Answer provided by: DTT (8/8/2023)
Submit an answer

Q: I have two questions. My first question is: Will this AR15 Quad rail drop-in handguard fit on an AR15 with an external gas piston ? My second question is, does it come with polyrubber rail covers ?

Asked by: Dion Baldonado - 12/19/2022
A: It will depend on the piston system. No it does not come with poly rubber rail covers
Answer provided by: DTT (7/7/2023)
Submit an answer

Q: How long is guard in inches?

Asked by: Rob T - 12/18/2022
A: The handguard is 7 in.
Answer provided by: DTT (5/19/2023)
Submit an answer

Q: Will this fit a Springfield Saint with a 16 inch barrel without adjustment?

Asked by: Mike - 10/18/2022
A: Yes, as they are both carbine length, this handguard should work with that rifle build.
Answer provided by: DTT (10/26/2022)
Submit an answer