Starter Kit Featuring:
+ ELD Performance 'Verba' 10.5" .223 Wylde, Carbine Gas, 1:8T, Medium Profile, 4150 CrMoV, Nitride
+ Gas Tube + Gas Block
+ 1/2X28 (5.56) Knurled Linear Compensator
+ w/ Crush Washer
ELD Performance 'Verba' 10.5" .223 Wylde, Carbine Gas, 1:8T, Medium Profile, 4150 CrMoV, Nitride
General Barrel Info: The Barrel on an AR-15 pistol operates through a 'gas impingement' system, where gas is tapped from off from the barrel and cycle back through a connected gas system, to help the bolt carrier in unlocking, and extracting a spent cartridge. Pistol length AR-15 barrels come in two gas lengths, Pistol, Carbine, & Mid-Length. AR-15 Pistol barrels can be chambered in a variety of different calibers, spanning from rifle to pistol cartridges. Thanks to the modularity of the AR-15 platform, your next pistol will be incredibly easy.
About This Barrel: The Barrel is made by ELD Performance it is 10.5" long, and is machined from 4150 Chrome Moly Vanadium and finished in a nitride appearance. Chambered for .223 Wylde, using a medium profile design, this barrel will fit your next AR-15 build perfectly.
About the Profile: Medium - Medium Profile barrels are designed to have an even weight distributed from the beginning to the end of the barrel, this results in a rather tubular looking appearance but with identical rigidity and properties to a government profile barrel.
Barrel Classification: Pistol
Length: This Barrel is designated as a pistol length barrel with an overall length of 10.5".
Caliber: .223Wylde - This barrel is chambered to fire both .223 Remington and 5.56 NATO, the most commonly used round designed for the AR-15 platform. .223 Wylde is a commercial specification of 5.56 NATO and will still allow you to chamber and fire 5.56 NATO cartridges.
Material: 4150 CrMoV - Chrome-Moly Vanadium, or simply "CMV", is the official mil-spec gun steel developed by Colt Firearms for the military-issued M16 and M4. It contains the same elements as 4150 steel. It also contains Vanadium. Vanadium significantly increases the strength, hardness, and high-temperature stability of the steel.
Finish: Nitride - Nitriding is a process during manufacturing that diffuses nitrogen into the steel to make a case-hardened surface for improved resistance and strength. A Nitrided barrel typically has a gloss black texture.
Thread Pitch: 1/2x28 - This threading is commonly found on barrels chambered in 5.56, .223, and .224. This will allow the installation of most muzzle devices such as flash hiders, blast cans, and compensators threaded to 1/2x28 threads.
The Gas Block on your AR-15 / AR-10 style rifle is the integral part of the gas system that allows your rifle to cycle. By tapping off gas from the barrel and diverting it back intothe gas key of th ebolt carrier group, there is enough inertial force to unlock the bolt carrier, send it rearward to the recoil assembly, and extract and pickup another cartridge to fire.
About this Gas Block: This gas block is machined with a .750 Gas Block Journal. .750 Gas Block Journals are standard for AR-15 barrels chambered in .223 Remington, 5.56 NATO, and .300 Blackout. This Gas Block Journal is known for its reliability it assisting the rifle function in regular and adverse conditions. This gas block has a 'low-profile' design and is made to fit underneath a free-float handguard.
Gas Block Journal Size: This gas block is an average .750 size gas block.
Platform: This gas block will work on both AR-15 and AR-10 barrels, for .308 and 6.5 Creedmoor barrels, be mindful of possible tolerance issues in the barrel profile..
Profile: This Gas Block is 'low-profile' and designed to fit underneath freefloat handguards.
Finish: Phosphate - This gas block uses a phosphate finish, making it have improved rust and corrosion resistance. Phosphate finishes typically make the part have a matte finish.
Attachment Style: Slide On - This gas block has a fixed size, and must slide on from the front of the rifle and is secured in place with 2 set screws near the bottom.
Material: Steel - This gas block is made from hardened & tempered steel, providing the strength and rigidity to withstand forces of expanding gasses and vibration from the rifle or pistol under operation.
DISCLAIMER: **Before purchasing, please be mindful of possible tolerance differences resulting from your handguard profile, barrel profile, gas length, and barrel Gas Block Journal.**
1/2X28 (5.56) Knurled Linear Compensator
There are three main types of muzzle devices for your weapon: flash suppressors/flash hiders, muzzle brakes, and compensators. AR-15's are getting more and more popular every day, partially due to their low recoil and muzzle rise. But with a good muzzle brake, recoil can be reduced even more. With a good compensator, muzzle rise significantly drops, almost vanishing. And while muzzle flash cannot be completely eliminated, it can be significantly reduced with a quality flash hider. These muzzle devices are growing increasingly more popular due to how easy they are to put on, 5-10 minutes with the right tool, because of their incredible efficiency, and because they make a cool looking gun.
About This Muzzle Device: Linear Compensator - Similar to the basic compensator, a linear compensator releases the escaping gas forward towards the target. This creates the illusion that the weapon is quieter due to the sound traveling forward towards the target instead of back towards the shooter or out to the sides. These style compensators are extremely effective on shorter AR-15's. And although putting one on your longer barrel rifle is just as easy. You will see the benefit of these compensators more on your 7.5-10.5 inch barrels.
Threading: 1/2x28 Is a common thread type for muzzle devices made for .22 caliber projectiles, commonly found on AR-15 barrels chambered in .223 Wylde, 5.56 NATO, and including .224 Valkyrie.
Finish: Manganese Phosphate - Manganese Phosphate finishes are used on barrels to protect against corrosion and wear. Manganese Phosphate finish is considered for its toughness, and is used in multiple different applications such as aerospace, ordnance, and other firearms-related parts.
A handguard is the most functional and unique part of any AR-15 build. Freefloat handguard (LINK [https://www.deltateamtactical.com/Freefloating_c_3464.html])offer an incredible reduction in weight and include many features such as mounting systems M-Lok/Keymod or both! Having the barrel in a freefloating handguard allows you to retain zero and have an increased level of accuracy. And having the ability to add grips, laser systems, lights, and bipods will further increase the capability of your next build.
It is recommended that the handguard completely cover the gas system of the AR-15 so please consider your gas system length when shopping for a handguard. If you wish to buy a pre-designed upper build kit equipped with a handguard please visit our AR-15 & LR-308 Upper Build Kits (LINK [https://www.deltateamtactical.com/ar-15-lr-308-upper-build-kits.html]) page.
About this Handguard: This 9" AirLite Series "Honeycomb" Freefloat Handguard from Guntec features an M-Lok rail mounting system
Mounting System: M-Lok - The 9" AirLite Series "Honeycomb" is equipped with a M-Lok mounting system for quickly attaching and securing extra accessories and equipment to your build.
Cuts: The Handguard features a hex style design to decrease weight and improve handling.
Barrel Nut: The 9" AirLite Series "Honeycomb" Handguard comes with a high quality steel barrel nut and mounting hardware.
Finish: To maintain corrosion resistance the 9" AirLite Series "Honeycomb" Freefloat Handguard is treated with a Type 3 hardcoat anodizing.
Profile: The 9" AirLite Series "Honeycomb" Freefloat Handguard was created with the shooter in mind. For this reason, the 9" AirLite Series "Honeycomb" Handguard was created with a slim profile for shooters looking for a comfortable lightweight foreend.
Includes: Mounting System, Handguard, Barrel Nut.
To view the most up-to-date shipping times Click HERE. To view Warranty, Returns, Terms & Restrictions Click HERE.