Davidson Defense Left-Handed Warden Duty SBR Ready 14.5-inch Carbine-Gas 1:7 5.56 NATO AR-15 Freefloat Keymod Handguard Pistol Full Build Kit

Left-Handed Warden Duty SBR Ready 14.5-Inch Carbine-Gas 1-7 5.56 NATO AR-15 Freefloat KeyMod Handguard Pistol Full Build Kit

This is a left-handed AR-15 pistol full build kit chambered in 5.56 NATO, centered on a 14.5-inch M4 profile 4150 CrMoV steel barrel with a Parkerized finish, a 1-7 twist rate, and a carbine-length gas system. The Black Diamond Series left-handed slick side billet aluminum upper receiver with a black anodized finish anchors the front end with a left-hand ejection port and a clean slick side exterior that omits the forward assist and dust cover from the receiver body. The carbine-length stainless steel gas tube and micro low-profile steel gas block at .750 O.D. complete the gas system, and the Trinity Force ECHO 12-inch freefloat KeyMod handguard with a full-length Picatinny top rail covers the forend. An A2 GI Birdcage flash hider at 1-2x28 closes out the muzzle end. A Davidson Defense premium left-handed M16 nitride bolt carrier group and a Mil-Spec M4 charging handle complete the upper side. The lower completion package covers a complete Mil-Spec AR-15 lower parts kit, a Mil-Spec heavy-duty 6-position buffer tube, a standard AR-15 carbine buffer at 3 oz., a standard AR-15 carbine recoil spring made in the USA, a Mil-Spec AR-15 and M16 receiver end plate, and an AR-15 carbine castle nut. This kit ships without a brace, leaving the final rear end setup to the buyer. Lower receiver not included.

Key Features

• 5.56 NATO chambering, 14.5-inch M4 profile 4150 CrMoV steel barrel, Parkerized finish
• 1-7 twist rate, 1-2x28 thread pitch
• Carbine-length gas system with carbine-length stainless steel gas tube
• Micro low-profile steel gas block, .750 O.D.
• Black Diamond Series left-handed slick side billet aluminum upper receiver, black anodized, no forward assist, no dust cover
• Trinity Force ECHO 12-inch freefloat KeyMod handguard, full-length Picatinny top rail
• Davidson Defense premium left-handed M16 nitride bolt carrier group
• Mil-Spec AR-15 M4 charging handle
• A2 GI Birdcage flash hider, 1-2x28 thread pitch
• Black 1-2-inch crush washer
• Complete Mil-Spec AR-15 lower parts kit
• Mil-Spec heavy-duty 6-position buffer tube
• Standard AR-15 carbine buffer, 3 oz.
• Standard AR-15 carbine recoil spring, made in the USA
• Mil-Spec AR-15 and M16 receiver end plate
• AR-15 carbine castle nut
• SBR Ready

Perfect For

• Left-handed AR-15 pistol builders who need everything above the lower receiver for a 5.56 NATO build
• Shooters pairing this kit with an existing stripped or complete AR-15 lower receiver configured for left-hand operation
• Left-handed builders selecting their own brace or stock for a custom 5.56 NATO pistol or SBR platform with a purpose-built left-hand ejection slick side billet upper and Trinity Force ECHO KeyMod handguard already covered

Upper Assembly

The Black Diamond Series left-handed slick side billet aluminum upper receiver with a black anodized finish anchors the front end with a left-hand ejection port and a clean slick side exterior profile that omits both the forward assist and dust cover from the receiver body. The 14.5-inch M4 profile 4150 CrMoV steel barrel brings a Parkerized finish and a 1-7 twist rate to the 5.56 NATO chamber, threaded at 1-2x28. The carbine-length stainless steel gas tube and micro low-profile steel gas block at .750 O.D. run a carbine-length gas system along the 14.5-inch barrel. The Trinity Force ECHO 12-inch freefloat KeyMod handguard surrounds the barrel and gas system along the forend with a full-length Picatinny top rail running the entire length of the handguard for optics and accessory mounting, and KeyMod slots along the remaining handguard surfaces for additional accessory attachment.

Bolt Carrier Group and Charging Handle

The Davidson Defense premium left-handed M16 nitride bolt carrier group is a purpose-built left-hand BCG designed to function with the left-handed upper receiver and eject cases from the left side of the build. The Mil-Spec M4 charging handle pairs with the BCG inside the upper receiver to complete the upper interior and finish the front end of the build.

Muzzle Device

The A2 GI Birdcage flash hider threads onto the 1-2x28 muzzle end of the barrel. The included black 1-2-inch crush washer seats at the barrel shoulder and completes the muzzle hardware for this kit.

Lower Completion Components

The complete Mil-Spec AR-15 lower parts kit covers the full internal lower component group, including the fire control group, magazine catch, bolt catch, and all associated pins and springs. The Mil-Spec heavy-duty 6-position buffer tube, standard AR-15 carbine buffer at 3 oz., and standard AR-15 carbine recoil spring made in the USA form the buffer system at the rear of the lower. The Mil-Spec AR-15 and M16 receiver end plate and AR-15 carbine castle nut lock the buffer tube down cleanly at the rear of the lower receiver. The brace or stock selection is left entirely to the buyer, keeping the final rear end open for a custom setup.

SBR Ready

This kit ships without a brace and is intended for builders selecting their own final rear end setup. The Mil-Spec heavy-duty 6-position buffer tube and complete lower hardware are included, but the brace or stock is sourced separately by the buyer. The final rear end configuration is setup dependent and determined by the component the buyer selects.

Follow safe handling and manufacturer instructions. Ensure compliance with all applicable federal, state, and local laws. Ships without a brace. Do not attach a stock unless compliant with applicable laws. Lower receiver not included.