1. Home
  2. Shop All
  3. Delta Deals AR-15 Trigger Upgrade Kit Including Davidson Defense Ultra Match Trigger System Crimson Red + "Lite" AR-15 LPK - No FCG + Anti Walk Pins

Delta Deals AR-15 Trigger Upgrade Kit Including Davidson Defense Ultra Match Trigger System Crimson Red + "Lite" AR-15 LPK - No FCG + Anti Walk Pins

Part Number: CO-82255
Write a Review
On sale $241.99 $119.99
Retail Price:$241.99
Your Savings:$122.00(50%)
71 left In Stock!
Availability: In Stock
Delta Deals AR-15 Trigger Upgrade Kit Including Davidson Defense Ultra Match Trigger System Crimson Red 
+ "Lite" AR-15 LPK - No FCG 
+ Anti Walk Pins

Here at Delta Team Tactical our primary objective to provide simple, effective, and affordable means to build a custom AR. One of the most effective ways to improve accuracy while shooting experience is by upgrading your trigger assembly. An upgraded trigger mechanism allows the shooter to shoot more accurately with a lower pull weight, provides a comfortable pull as compared to stock triggers, and is more ergonomic. One frustration people have when upgrading any part is knowing which parts are compatible with each other.  That's why we created the Delta Deals Trigger Upgrade Kits, the easiest way to have an enhanced shooting experience at the most affordable price.

Davidson Defense Ultra Match Trigger System Crimson Red

Davidson Defense single-stage, non-adjustable, drop-in trigger boasts a solid unheard of 3-pound pull weight and is pre-assembled in hard coat anodized aluminum housing for immediate competition, hunting, and tactical applications right out of the box. This trigger features a trigger reset aid; when the hammer comes down, the trigger is pushed forward past the reset point. This gives you one of the fastest resetting triggers on the market.

FEATURES:
Ultra High Quality 
Made From Solid Billet A2 Tool Steel ( Hardened To 58-60 Rockwell) Ultra Hard
This Trigger Uses Higher Quality Steel Than Almost Every Trigger In The Market.
Most Companies Use Cheap 17-4 Stainless Or 1450 Cr Mo
Recoil Technologies Uses Certified A2 Tool Steel 
Forge Heated 1200F Machine Hammered & Peened Between 250 Times To Guarantee That The Hammer Will Never Breaks & The Steel Is Fully Tempered No Other Trigger Company Does What This Recoil Technologies Does To Give You The Finest Trigger Available.
Made from American Certified Tool Grade A2 steel, the Trigger, Disconnect, and Hammer Frog Leg Springs That Are Made From The Highest Quality Spring Steel Here In Utah That gives This Trigger The Ability To Go Down To 3.0 LBS Yet Be Ultra Reliable And Strong Enough To Fire Surplus Ultra Hard 7.62x39 Primers & Even 308 Primers with Ease Then Its Given Its Badge A Crimson Red Finish that stands for ultimate in trigger strength & corrosion resistance, even smoother trigger pull giving this ultra-match trigger system the power to give you that extra bit of Accuracy out of your gun you have been looking for. Surpassing The Competition In Price & Quality 
Uses Regular Trigger Pins (Pin size, 0.154")  

Instructions for installing Drop-In AR-15 and AR-10 trigger group.

1. If installing in a receiver that already has a trigger and hammer installed, remove the trigger pin and hammer pin and remove the trigger and hammer as well as the grip, safety selector and detent. New receivers, install the drop-in trigger before mounting the grip.

2. Insert the trigger pack into the fire control compartment

3. Insert the hammer and trigger pins. Anti-walk type pins work much better, as standard pins can drop out.

4. Towards the rear of the trigger cassette you will see two small set screws. With the trigger and hammer pins in place, turn those set screws down to raise the trigger the point that there is pressure created on the trigger and hammer pins which will hold them in place. This step is VERY important and will take care of the slight dimensional differences between lower receivers.

5. Install the retainers on the anti-walk pins

6. Insert the safety selector switch. The hammer needs to be in the cocked position. Take care as it is inserted to not push the selector into the back extension of the trigger. Replace the safety detent, spring and grip.

7. At this point you can test the trigger pull and reset.

NOTE:  (TIGHTEN THE 2 SMALL SET SCREWS TO THE REAR OF THE TRIGGER OR THE TRIGGER WILL NOT FUNCTION CORRECTLY)

"Lite" AR-15 LPK - No FCG

KAK AR-15 "LITE" Lower Parts Kit, Features KAK produced parts throughout. No Fire Control Group. KAK Trigger Guard included! Standard A2 Handle, KAK Black Oxide Coated Steel Springs.

Use this Lower Parts Kit when using your aftermarket Match Trigger.

Same as KAK's Standard LPK but missing the following items:
Hammer
Hammer Spring
Trigger
Trigger Spring
Disconnector
Disconnector Spring
Hammer Pin
Trigger Pin

Parts Missing From Standard LPK:
Hammer
Trigger
Disconnector
Pistol Grip

SS Anti Walk Pins

Keeps trigger/hammer pins from "walking" out of the receiver
Helps prevent wear and enlargement of the receiver trigger/hammer pin holes
Stainless Steel construction

Please note: If the listing says "In-Stock" it means we have all of the items in stock. Please check this LINK to view our most up to date shipping status. 
Warranty, Returns & Terms:
Delta Team Tactical offers a 30 day return, refund and exchange policy. You must email or call Delta Team Tactical and obtain an RMA number prior to any return, refund, or exchange. All returns must include the original order number, receipt or invoice, along with the billing address, shipping address, contact phone numbers, contact emails, and RMA number. Returns, refunds, and exchanges may take up to two weeks, not including transit times, for processing after we receive it. Return shipping costs will be the responsibility of the returning party, with the exception of the wrong item being received or on warranty exchange during the first 30 days after delivery. Items returned for warranty will only be replaced or exchanged, not refunded.

Recently Viewed Items

TOP
0 Items