Davidson Defense Fleetbane 10.5-inch Pistol-Gas 1:8 .300 BLK AR-15 Freefloat M-Lok Handguard Pistol Full Build Kit, SBR Ready

Fleetbane 10.5-inch Pistol-Gas 1:8 .300 BLK AR-15 Freefloat M-LOK Pistol Full Build Kit, SBR Ready

The Fleetbane is a .300 AAC Blackout AR-15 Full Build Kit configured for the SBR Ready designation, built around a compact 10.5-inch pistol-length gas platform. The kit centers on a 10.5-inch HBAR profile parkerized barrel with a 1:8 twist rate and 5/8x24 thread pitch, paired with a GI birdcage flash hider compatible with .308 Winchester, 7.62x39, and .300 Blackout, and a black 5/8-inch crush washer. A micro low-profile steel gas block at 0.750 diameter and a pistol-length gas tube are included on the front end. The 7075-T6 aluminum anodized upper receiver features M4 feed ramps, a forward assist, and an ejection port door assembly, paired with a 10-inch Trinity Force KMX freefloat M-LOK handguard. A complete AR-15 bolt carrier group compatible with .223 Remington, 5.56 NATO, .300 Blackout, and .350 Legend, and a Mil-Spec AR-15 M4 charging handle complete the upper side. The lower hardware includes a complete Mil-Spec AR-15 lower parts kit, a Mil-Spec heavy-duty 6-position aluminum carbine buffer tube, a standard 3 oz AR-15 carbine buffer, a USA-made standard AR-15 carbine recoil spring, a Mil-Spec AR-15 M16 receiver end plate, and a Mil-Spec AR-15 castle nut. This kit ships without a brace and is intended for customers selecting their own final setup. Lower receiver not included.

Key Features

• 10.5-inch HBAR profile parkerized barrel, 1:8 twist, 5/8x24 thread pitch, .300 AAC Blackout
• Pistol-length gas system
• Pistol-length gas tube
• Micro low-profile steel gas block, 0.750
• GI birdcage flash hider, 5/8x24, compatible with .308 Winchester, 7.62x39, and .300 Blackout, black 5/8-inch crush washer included
• 7075-T6 aluminum upper receiver, anodized, M4 feed ramps, forward assist, ejection port door assembly
• 10-inch Trinity Force KMX freefloat M-LOK handguard
• Complete AR-15 bolt carrier group, .223 Remington and 5.56 NATO and .300 Blackout and .350 Legend compatible
• Mil-Spec AR-15 M4 charging handle
• Complete Mil-Spec AR-15 lower parts kit
• Mil-Spec heavy-duty 6-position aluminum carbine buffer tube
• Standard AR-15 carbine buffer, 3 oz
• Standard AR-15 carbine recoil spring, made in USA
• Mil-Spec AR-15 M16 receiver end plate
• Mil-Spec AR-15 castle nut
• SBR Ready configuration

Perfect For

• Builders sourcing a complete .300 AAC Blackout AR-15 pistol full build kit with a 7075-T6 anodized upper receiver with forward assist, 10.5-inch HBAR parkerized barrel, BCG compatible with multiple calibers, and 10-inch Trinity Force KMX freefloat M-LOK handguard already included, pairing it with their own lower receiver and selecting their own rear brace or stock
• Shooters building a compact 10.5-inch pistol-gas .300 BLK platform who want the BCG, charging handle, and complete buffer system covered without a rear interface commitment
• AR-15 pistol builders who want a .300 AAC Blackout full build kit with a BCG compatible with multiple calibers and a GI birdcage flash hider at 5/8x24 in an SBR Ready configuration without sourcing components separately

Barrel and Muzzle Device

The 10.5-inch HBAR profile barrel is chambered in .300 AAC Blackout with a parkerized finish, 1:8 twist rate, and 5/8x24 thread pitch, which matches the included GI birdcage flash hider, compatible with .308 Winchester, 7.62x39, and .300 Blackout. A black 5/8-inch crush washer, a micro low-profile steel gas block at 0.750 diameter, and a pistol-length gas tube cover the front end gas configuration on this pistol-length platform.

Upper Receiver and Handguard

The 7075-T6 aluminum upper receiver carries an anodized finish with M4 feed ramps, a forward assist, and an ejection port door assembly. The 10-inch Trinity Force KMX freefloat M-LOK handguard features M-LOK attachment points along the body for accessory mounting. These two components define the exterior structure of the upper assembly on this AR-15 pistol platform.

Bolt Carrier Group and Charging Handle

The complete AR-15 bolt carrier group is compatible with .223 Remington, 5.56 NATO, .300 Blackout, and .350 Legend. A Mil-Spec AR-15 M4 charging handle is included to complete the upper component set.

SBR Ready Configuration

The complete Mil-Spec AR-15 lower parts kit covers the internal lower receiver components. The buffer system includes a Mil-Spec heavy-duty 6-position aluminum carbine buffer tube, a standard 3 oz AR-15 carbine buffer, a USA-made standard AR-15 carbine recoil spring, a Mil-Spec AR-15 M16 receiver end plate, and a Mil-Spec AR-15 castle nut. This kit ships without a brace, with the brace or stock selection remaining with the buyer.

Follow safe handling and manufacturer instructions. Ensure compliance with all applicable federal, state, and local laws. Ships without a brace. Do not attach a stock unless compliant with applicable laws. Lower receiver not included.